The Story
Delphi TC8348 Rear Left Lower Rearward Control Arm
Delphi TC8348 is a standard replacement suspension control arm for the rear left lower rearward position on select Audi models. Built with stamped steel construction, a painted finish, and rubber bushings, it is made for direct-fit suspension service where precise alignment and consistent rear suspension geometry matter.
Key Features
- Part number: TC8348
- Suspension control arm for the rear left lower rearward position
- Stamped steel construction with painted black finish
- Rubber bushings with black bushing color
- Standard replacement grade
- Straight arm shape
- No pre-greasing, grease fitting, or greaseable design
- No mounting hardware included
Fitment
- Fits 2020-2022 Audi A6 allroad, rear left lower rearward.
- Fits 2019-2022 Audi A6 Quattro, rear left lower rearward.
- Fits 2019-2022 Audi A7 Sportback, rear left lower rearward.
- Fits 2019-2022 Audi A8 Quattro, rear left lower rearward.
- Fits 2018-2022 Audi Q5, rear left lower rearward.
- Fits 2020-2022 Audi Q5 PHEV, rear left lower rearward.
- Fits 2021-2022 Audi Q5 Sportback, rear left lower rearward.
- Fits 2017-2022 Audi Q7, rear left lower rearward.
- Fits 2019-2022 Audi Q8, rear left lower rearward.
- Fits 2020-2022 Audi S6, rear left lower rearward.
- Fits 2020-2022 Audi S7 Sportback, rear left lower rearward.
- Fits 2020-2022 Audi S8, rear left lower rearward.
- Fits 2020-2022 Audi SQ5, rear left lower rearward.
- Fits 2018 Audi SQ5, rear left lower rearward.
- Fits 2021-2022 Audi SQ5 Sportback, rear left lower rearward.
- Fits 2020-2022 Audi SQ7, rear left lower rearward.
- Fits 2020-2022 Audi SQ8, rear left lower rearward.
Detailed Description
Delphi applies OE-focused engineering to its aftermarket steering and suspension portfolio, and TC8348 reflects that approach with dimensional and material analysis aimed at proper fit and function. This rear left lower rearward control arm uses steel construction and rubber bushings to support suspension articulation while helping maintain alignment stability on Audi A6 allroad, Audi A6 Quattro, Audi Q7, Audi Q8, Audi SQ5, and related applications. This part cross-references 4M0 501 529 N and 80A 501 529 A for the same application.
What It Helps Address
- Rear suspension looseness or excess movement at the control arm
- Clunking or knocking from worn bushings
- Uneven tire wear related to rear alignment issues
- Steering or handling instability caused by worn suspension links
- Corrosion-related replacement needs on the rear suspension arm
Installation Notes and Tips
Replace the control arm in the correct rear left lower rearward position and verify all suspension fasteners are torqued to the vehicle manufacturer’s specifications. Because mounting hardware is not included, inspect existing hardware before installation and replace any worn or damaged fasteners as needed. A professional alignment is recommended after suspension work on compatible Audi A6 Quattro, Audi Q7, Audi Q8, and related models.
Quality Assurance
Delphi subjects its OE-style suspension components to extreme temperature and salt-spray testing, along with dimensional and material checks to support fitment consistency and durability. Part number TC8348 is built as a standard replacement control arm for the listed Audi applications.
Description
Delphi TC8348 Rear Left Lower Rearward Control Arm
Delphi TC8348 is a standard replacement suspension control arm for the rear left lower rearward position on select Audi models. Built with stamped steel construction, a painted finish, and rubber bushings, it is made for direct-fit suspension service where precise alignment and consistent rear suspension geometry matter.
Key Features
- Part number: TC8348
- Suspension control arm for the rear left lower rearward position
- Stamped steel construction with painted black finish
- Rubber bushings with black bushing color
- Standard replacement grade
- Straight arm shape
- No pre-greasing, grease fitting, or greaseable design
- No mounting hardware included
Fitment
- Fits 2020-2022 Audi A6 allroad, rear left lower rearward.
- Fits 2019-2022 Audi A6 Quattro, rear left lower rearward.
- Fits 2019-2022 Audi A7 Sportback, rear left lower rearward.
- Fits 2019-2022 Audi A8 Quattro, rear left lower rearward.
- Fits 2018-2022 Audi Q5, rear left lower rearward.
- Fits 2020-2022 Audi Q5 PHEV, rear left lower rearward.
- Fits 2021-2022 Audi Q5 Sportback, rear left lower rearward.
- Fits 2017-2022 Audi Q7, rear left lower rearward.
- Fits 2019-2022 Audi Q8, rear left lower rearward.
- Fits 2020-2022 Audi S6, rear left lower rearward.
- Fits 2020-2022 Audi S7 Sportback, rear left lower rearward.
- Fits 2020-2022 Audi S8, rear left lower rearward.
- Fits 2020-2022 Audi SQ5, rear left lower rearward.
- Fits 2018 Audi SQ5, rear left lower rearward.
- Fits 2021-2022 Audi SQ5 Sportback, rear left lower rearward.
- Fits 2020-2022 Audi SQ7, rear left lower rearward.
- Fits 2020-2022 Audi SQ8, rear left lower rearward.
Detailed Description
Delphi applies OE-focused engineering to its aftermarket steering and suspension portfolio, and TC8348 reflects that approach with dimensional and material analysis aimed at proper fit and function. This rear left lower rearward control arm uses steel construction and rubber bushings to support suspension articulation while helping maintain alignment stability on Audi A6 allroad, Audi A6 Quattro, Audi Q7, Audi Q8, Audi SQ5, and related applications. This part cross-references 4M0 501 529 N and 80A 501 529 A for the same application.
What It Helps Address
- Rear suspension looseness or excess movement at the control arm
- Clunking or knocking from worn bushings
- Uneven tire wear related to rear alignment issues
- Steering or handling instability caused by worn suspension links
- Corrosion-related replacement needs on the rear suspension arm
Installation Notes and Tips
Replace the control arm in the correct rear left lower rearward position and verify all suspension fasteners are torqued to the vehicle manufacturer’s specifications. Because mounting hardware is not included, inspect existing hardware before installation and replace any worn or damaged fasteners as needed. A professional alignment is recommended after suspension work on compatible Audi A6 Quattro, Audi Q7, Audi Q8, and related models.
Quality Assurance
Delphi subjects its OE-style suspension components to extreme temperature and salt-spray testing, along with dimensional and material checks to support fitment consistency and durability. Part number TC8348 is built as a standard replacement control arm for the listed Audi applications.
