The Story
OE-Style Front Right Lower Rearward Control Arm
Delphi TC8409 is a suspension control arm for the front right lower rearward position on select Jaguar models. Built as a standard replacement with OE-focused dimensional and material analysis, it is made to match the original fit and function for Jaguar XJ8, XJR, and Vanden Plas applications.
Delphi TC8409 is a practical choice for restoring front suspension geometry on 1998-2003 Jaguar XJ8, XJR, and Vanden Plas vehicles. The steel arm uses a bent shape, painted finish, and pre-greased construction for service-ready installation.
Key Features
- Part number: TC8409
- Front right lower rearward suspension control arm
- Fits 1998-2003 Jaguar Vanden Plas, front right lower rearward
- Fits 1998-2003 Jaguar XJ8, front right lower rearward
- Fits 1998-2003 Jaguar XJR, front right lower rearward
- Steel construction with casting/forged build
- Black painted finish
- Pre-greased design
- Bushings included with rubber bushing material
- Polyoxymethylene (POM) bearing type
- Mounting hardware included
- Non-adjustable, standard replacement design
Detailed Description
Delphi TC8409 is engineered as an OE-style suspension control arm for the front right lower rearward position. It is built from steel with a casting/forged construction, a bent profile, and a painted black finish. The arm includes bushings, uses a press-in mounting type, and arrives pre-greased to support straightforward replacement service. Delphi applies OE-level dimensional and material analysis to help maintain proper alignment and suspension response on Jaguar XJ8, XJR, and Vanden Plas models.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
What It Helps Address
- Front suspension looseness or play at the control arm
- Clunking or knocking from the front right suspension
- Uneven tire wear caused by worn suspension geometry
- Steering pull related to worn lower rearward arm components
- Restoration of factory ride control on Jaguar XJ8, XJR, and Vanden Plas
Installation Notes and Tips
Install TC8409 in the front right lower rearward position only. Because this is a press-in style control arm with included bushings, inspect adjacent suspension components, fasteners, and alignment settings before and after installation. A professional wheel alignment is recommended after replacement to verify suspension geometry.
Quality Assurance
Delphi subjects its OE-style steering and suspension components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure testing. That validation process supports fit consistency and corrosion resistance expectations for daily-driven Jaguar applications.
Description
OE-Style Front Right Lower Rearward Control Arm
Delphi TC8409 is a suspension control arm for the front right lower rearward position on select Jaguar models. Built as a standard replacement with OE-focused dimensional and material analysis, it is made to match the original fit and function for Jaguar XJ8, XJR, and Vanden Plas applications.
Delphi TC8409 is a practical choice for restoring front suspension geometry on 1998-2003 Jaguar XJ8, XJR, and Vanden Plas vehicles. The steel arm uses a bent shape, painted finish, and pre-greased construction for service-ready installation.
Key Features
- Part number: TC8409
- Front right lower rearward suspension control arm
- Fits 1998-2003 Jaguar Vanden Plas, front right lower rearward
- Fits 1998-2003 Jaguar XJ8, front right lower rearward
- Fits 1998-2003 Jaguar XJR, front right lower rearward
- Steel construction with casting/forged build
- Black painted finish
- Pre-greased design
- Bushings included with rubber bushing material
- Polyoxymethylene (POM) bearing type
- Mounting hardware included
- Non-adjustable, standard replacement design
Detailed Description
Delphi TC8409 is engineered as an OE-style suspension control arm for the front right lower rearward position. It is built from steel with a casting/forged construction, a bent profile, and a painted black finish. The arm includes bushings, uses a press-in mounting type, and arrives pre-greased to support straightforward replacement service. Delphi applies OE-level dimensional and material analysis to help maintain proper alignment and suspension response on Jaguar XJ8, XJR, and Vanden Plas models.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
What It Helps Address
- Front suspension looseness or play at the control arm
- Clunking or knocking from the front right suspension
- Uneven tire wear caused by worn suspension geometry
- Steering pull related to worn lower rearward arm components
- Restoration of factory ride control on Jaguar XJ8, XJR, and Vanden Plas
Installation Notes and Tips
Install TC8409 in the front right lower rearward position only. Because this is a press-in style control arm with included bushings, inspect adjacent suspension components, fasteners, and alignment settings before and after installation. A professional wheel alignment is recommended after replacement to verify suspension geometry.
Quality Assurance
Delphi subjects its OE-style steering and suspension components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure testing. That validation process supports fit consistency and corrosion resistance expectations for daily-driven Jaguar applications.
