The Story
OE-Style Front Lower Forward Bushing
Delphi TD2073W is a suspension control arm bushing for the front lower forward position. Built with steel bushing material and standard replacement construction, it is made for vehicles that need a precise OE-style suspension service part.
Delphi applies OE-focused dimensional and material analysis to help match the original part profile, and its testing includes exposure to temperatures below -40 C and above 120 C, plus 720 hours of salt spray. That makes TD2073W a practical choice for Hyundai Palisade, Kia Telluride, Kia Sportage, Hyundai Tucson, and other listed applications.
Key Features
- Part number: TD2073W
- Suspension control arm bushing for the front lower forward position
- Steel bushing material with standard replacement grade
- 1 bushing included
- Black/gray finish
- Inside diameter: 12.20 mm
- Outside diameter: 48.00 mm
- Length and width: 48.00 mm
- Height: 54.70 mm
- Steering type: manual
- No grease fitting, sleeve, dust boot, bracket, snap rings, or mounting hardware included
Detailed Description
Delphi TD2073W is engineered as a front lower forward suspension control arm bushing for a wide range of Hyundai and Kia vehicles. It is a direct-fit style replacement for applications such as 2020-2024 Hyundai Palisade, 2020-2024 Kia Telluride, 2014-2022 Kia Sportage, 2014-2021 Hyundai Tucson, 2015-2021 Kia Sedona, 2015-2020 Hyundai Santa Fe, 2016-2020 Kia Sorento, 2015-2019 Hyundai Santa Fe XL, 2014-2019 Kia Soul, 2015-2019 Kia Soul EV, and 2015-2018 Hyundai Santa Fe Sport.
This part cross-references MOOG Chassis Products K201850 for the same application. Delphi TD2073W is built to support OE-style fit and material consistency for suspension service on Hyundai Tucson and Kia Sorento platforms, as well as other listed models.
What It Helps Address
- Excessive play in the front lower forward control arm mounting point
- Clunking or knocking from worn suspension bushings
- Uneven steering response caused by deteriorated bushing material
- Vibration transfer through the front suspension
- Alignment instability related to worn control arm bushings
Installation Notes and Tips
Verify the front lower forward position before ordering, since this bushing is application-specific. Confirm the inside diameter, outside diameter, and overall dimensions against the original part during service. Professional installation and a suspension inspection are recommended, especially when replacing bushings on Hyundai Palisade, Kia Telluride, Hyundai Tucson, or Kia Sportage models.
Quality Assurance
Delphi uses OE-oriented engineering, dimensional analysis, and material validation to support consistent aftermarket fitment. The part is tested for extreme temperature exposure and salt-spray resistance to reflect demanding undercar conditions.
Description
OE-Style Front Lower Forward Bushing
Delphi TD2073W is a suspension control arm bushing for the front lower forward position. Built with steel bushing material and standard replacement construction, it is made for vehicles that need a precise OE-style suspension service part.
Delphi applies OE-focused dimensional and material analysis to help match the original part profile, and its testing includes exposure to temperatures below -40 C and above 120 C, plus 720 hours of salt spray. That makes TD2073W a practical choice for Hyundai Palisade, Kia Telluride, Kia Sportage, Hyundai Tucson, and other listed applications.
Key Features
- Part number: TD2073W
- Suspension control arm bushing for the front lower forward position
- Steel bushing material with standard replacement grade
- 1 bushing included
- Black/gray finish
- Inside diameter: 12.20 mm
- Outside diameter: 48.00 mm
- Length and width: 48.00 mm
- Height: 54.70 mm
- Steering type: manual
- No grease fitting, sleeve, dust boot, bracket, snap rings, or mounting hardware included
Detailed Description
Delphi TD2073W is engineered as a front lower forward suspension control arm bushing for a wide range of Hyundai and Kia vehicles. It is a direct-fit style replacement for applications such as 2020-2024 Hyundai Palisade, 2020-2024 Kia Telluride, 2014-2022 Kia Sportage, 2014-2021 Hyundai Tucson, 2015-2021 Kia Sedona, 2015-2020 Hyundai Santa Fe, 2016-2020 Kia Sorento, 2015-2019 Hyundai Santa Fe XL, 2014-2019 Kia Soul, 2015-2019 Kia Soul EV, and 2015-2018 Hyundai Santa Fe Sport.
This part cross-references MOOG Chassis Products K201850 for the same application. Delphi TD2073W is built to support OE-style fit and material consistency for suspension service on Hyundai Tucson and Kia Sorento platforms, as well as other listed models.
What It Helps Address
- Excessive play in the front lower forward control arm mounting point
- Clunking or knocking from worn suspension bushings
- Uneven steering response caused by deteriorated bushing material
- Vibration transfer through the front suspension
- Alignment instability related to worn control arm bushings
Installation Notes and Tips
Verify the front lower forward position before ordering, since this bushing is application-specific. Confirm the inside diameter, outside diameter, and overall dimensions against the original part during service. Professional installation and a suspension inspection are recommended, especially when replacing bushings on Hyundai Palisade, Kia Telluride, Hyundai Tucson, or Kia Sportage models.
Quality Assurance
Delphi uses OE-oriented engineering, dimensional analysis, and material validation to support consistent aftermarket fitment. The part is tested for extreme temperature exposure and salt-spray resistance to reflect demanding undercar conditions.
