đźšš Free Worldwide Shipping on All Orders!Shop Now
Delphi TD4810W Suspension Stabilizer Bar Bushing Kit - Rear
HomeStore

Delphi TD4810W Suspension Stabilizer Bar Bushing Kit - Rear

Delphi TD4810W Suspension Stabilizer Bar Bushing Kit - Rear

$8.15

Original: $23.29

-65%
Delphi TD4810W Suspension Stabilizer Bar Bushing Kit - Rear—

$23.29

$8.15

The Story

Rear Stabilizer Bar Bushing Kit for Honda and Acura

Restore rear suspension support with this Delphi stabilizer bar bushing kit, part number TD4810W. It is a standard replacement bushing kit for select Honda and Acura models, including the Honda Pilot, Honda Ridgeline, Honda Passport, and Acura MDX.

  • Rear suspension stabilizer bar bushing kit
  • Black bushing construction
  • Inside diameter: 0.965 in. / 24.5 mm
  • Width: 2.039 in.
  • Height: 1.929 in. / 49.0 mm
  • Standard replacement grade
  • No grease fitting included
  • No mounting hardware included

OE-Style Fit and Material Control

Delphi applies OE-focused dimensional and material analysis to help match the original part’s fit and function. TD4810W is built for rear stabilizer bar service on 2009-2015 Honda Pilot, 2014-2020 Acura MDX, 2017-2020 Honda Ridgeline, and 2020-2021 Honda Passport applications. This part cross-references MOOG Chassis Products K201420 and replaces OE number 52306-SZA-A01 for the same application.

Common Problems This Part Addresses

  • Rear sway bar bushing wear that can create looseness in the suspension
  • Clunking or rattling from the rear stabilizer bar area
  • Excess movement at the stabilizer bar mounting point
  • Uneven rear suspension response caused by deteriorated bushings
  • Noise from cracked, hardened, or compressed original bushings

Installation Notes and Tips

Confirm rear position and verify the stabilizer bar diameter before installation. Inspect the bar, brackets, and surrounding suspension components for wear or corrosion before replacing the bushings. Because mounting hardware is not included, reuse only serviceable hardware or source the correct fasteners separately if needed.

Quality Assurance

Delphi subjects its OE-based steering and suspension components to extreme temperature testing from below -40 degrees C to above 120 degrees C, along with 720 hours of salt spray exposure. These checks support durability and fit consistency for rear suspension service on Honda Pilot, Honda Ridgeline, Honda Passport, and Acura MDX applications.

Description

Rear Stabilizer Bar Bushing Kit for Honda and Acura

Restore rear suspension support with this Delphi stabilizer bar bushing kit, part number TD4810W. It is a standard replacement bushing kit for select Honda and Acura models, including the Honda Pilot, Honda Ridgeline, Honda Passport, and Acura MDX.

  • Rear suspension stabilizer bar bushing kit
  • Black bushing construction
  • Inside diameter: 0.965 in. / 24.5 mm
  • Width: 2.039 in.
  • Height: 1.929 in. / 49.0 mm
  • Standard replacement grade
  • No grease fitting included
  • No mounting hardware included

OE-Style Fit and Material Control

Delphi applies OE-focused dimensional and material analysis to help match the original part’s fit and function. TD4810W is built for rear stabilizer bar service on 2009-2015 Honda Pilot, 2014-2020 Acura MDX, 2017-2020 Honda Ridgeline, and 2020-2021 Honda Passport applications. This part cross-references MOOG Chassis Products K201420 and replaces OE number 52306-SZA-A01 for the same application.

Common Problems This Part Addresses

  • Rear sway bar bushing wear that can create looseness in the suspension
  • Clunking or rattling from the rear stabilizer bar area
  • Excess movement at the stabilizer bar mounting point
  • Uneven rear suspension response caused by deteriorated bushings
  • Noise from cracked, hardened, or compressed original bushings

Installation Notes and Tips

Confirm rear position and verify the stabilizer bar diameter before installation. Inspect the bar, brackets, and surrounding suspension components for wear or corrosion before replacing the bushings. Because mounting hardware is not included, reuse only serviceable hardware or source the correct fasteners separately if needed.

Quality Assurance

Delphi subjects its OE-based steering and suspension components to extreme temperature testing from below -40 degrees C to above 120 degrees C, along with 720 hours of salt spray exposure. These checks support durability and fit consistency for rear suspension service on Honda Pilot, Honda Ridgeline, Honda Passport, and Acura MDX applications.

You may also like

-65%NEW
Thumbnail 1

Suplex 03180 Coil Spring - Rear

$87.56

$30.65

-65%NEW
Thumbnail 1

Suplex 03188 Coil Spring - Rear, Rear Left or Rear Right

$121.71

$42.60

-65%NEW
Thumbnail 1

Suplex 03247 Coil Spring - Front, Front Left or Front Right

$122.55

$42.89

-65%NEW
Thumbnail 1

Suplex 03107 Coil Spring - Front, Front Left or Front Right

$115.47

$40.41

-65%NEW
Thumbnail 1

Suplex 03114 Coil Spring - Rear, Rear Left or Rear Right

$87.01

$30.45

-65%NEW
Thumbnail 1

Suplex 03152 Coil Spring - Rear

$83.14

$29.10

-65%NEW
Thumbnail 1

Suplex 03108 Coil Spring - Front

$121.47

$42.51

-65%NEW
Thumbnail 1

Suplex 03115 Coil Spring - Rear

$94.04

$32.91

-65%NEW
Thumbnail 1

Suplex 06212 Coil Spring - Rear

$129.52

$45.33

-65%NEW
Thumbnail 1

Suplex 06204 Coil Spring - Rear

$143.08

$50.08

NEW
Thumbnail 1

Suplex 03260 Coil Spring - Front

$125.95

NEW
Thumbnail 1

Suplex 03265 Coil Spring - Rear

$105.81