Dynamite Friction 350-03181 Brake Hydraulic Hose - Rear Right

Rear Right Brake Hose for Kia Niro and Hyundai Ioniq

Dynamite Friction DFC Brake Hose 350-03181 is a DOT approved rear right brake hydraulic hose for select Kia Niro and Hyundai Ioniq applications. It uses an EPDM outer sleeve, includes the required bracket and gasket/seal, and is built with a female M10-1.00 end and a banjo fitting on the other end for a direct-style hydraulic connection.

DFC Brake Hose Line Details

The DFC Brake Hose line focuses on replacement brake hydraulic hoses with application-specific fitment and OE-style connection points. Part number 350-03181 follows that approach with the correct bracket, banjo fitting, and sealing components called out for the rear right position on supported vehicles.

Key Features

• DOT approved brake hydraulic hose
• EPDM outer sleeve material
• Includes bracket and gasket/seal
• Female end with M10-1.00 thread size
• Banjo fitting with 10.0 mm inside diameter
• Overall length: 376
• Rear right position application

Detailed Description

Dynamite Friction 350-03181 is a rear right brake hose for 2017-2022 Kia Niro and 2020 Hyundai Ioniq, plus 2018-2019 Hyundai Ioniq with a 38mm rear caliper piston. This brake hydraulic hose is built for the rear right corner and uses the specified female M10-1.00 connection and banjo end to match the listed applications. If you are replacing a worn or leaking rear brake line on a Kia Niro or Hyundai Ioniq, this part number 350-03181 provides the fitment details needed for a direct replacement search.

This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.

What It Helps Address

• Brake fluid seepage at the rear right hose connection
• Cracked or aged rubber brake hose material
• Corrosion or damage at the hose bracket area
• Soft or inconsistent brake pedal feel caused by hose deterioration
• Service replacement for rear brake hydraulic line wear

Installation Notes and Tips

Verify rear right fitment against the vehicle year, model, and caliper configuration before installation. Confirm the female M10-1.00 thread and banjo connection match the original hose routing and fittings, and inspect the mounting bracket location and sealing surfaces before tightening. After installation, bleed the brake system and check for leaks at both ends of the hose.

Quality Assurance

This brake hose is DOT approved and includes the bracket plus gasket/seal specified in the product data. Use the listed fitment details for 2017-2022 Kia Niro and 2020-2019 Hyundai Ioniq rear right applications to confirm the correct replacement before service.