The Story
DFC 4000 HybriDynamic Brake Pads for Front Disc Brakes
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and everyday drivability. This front disc brake pad set is a hybrid friction design that balances stopping performance with low dust and low noise characteristics for daily use.
The DFC 4000 HybriDynamic Brake Pad line focuses on consistent brake response and practical value. For Ford Escape, Mercury Mariner, and Mazda Tribute front brake service, part number 4000-1047-00 provides a direct-fit pad set for the listed applications.
Key Features
- Hybrid friction material for balanced street performance
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Disc brake pad set with 4 pads included
- Front position application
- Part number 4000-1047-00
Detailed Product Description
The DFC 4000 HybriDynamic Brake Pads use a hybrid friction material composition to deliver predictable braking behavior in everyday driving conditions. Pad dimensions measure 67.3 mm in height, 170.7 mm in width, and 15 mm in overall thickness, with the same sizing for both inner and outer pads. The pads are prepared without a pad wear sensor provision and do not include mounting hardware.
These pads are listed for front brake applications on 2005-2012 Ford Escape, 2005-2011 Mercury Mariner, and 2005-2010 Mazda Tribute, including configurations with steel front caliper pistons, rear drum brakes, or rear disc brakes as noted in the fitment data. If you are searching for front brake pads for a Ford Escape, Mercury Mariner, or Mazda Tribute, part number 4000-1047-00 is the specified DFC HybriDynamic option.
What This Product Helps Address
- Squealing or noisy front brake pads
- Excess brake dust buildup on wheels
- Uneven or inconsistent brake pedal feel
- Reduced braking response from worn front pads
- Front brake service on listed Ford, Mercury, and Mazda vehicles
Installation Notes and Tips
- Verify rotor condition, caliper operation, and pad fitment before installation.
- Mounting hardware is not included, so reuse or replace hardware as needed.
- These pads are not prepared for a pad wear sensor.
- Confirm the vehicle’s front brake configuration against the fitment notes before ordering.
- For best results, clean the caliper bracket and inspect slide pins during brake service.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a brake pad solution focused on consistent response, low dust, and low noise for daily driving. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
- Fits 2009-2012 Ford Escape, front; steel front caliper pistons
- Fits 2008 Ford Escape, front
- Fits 2005 Ford Escape, front
- Fits 2006-2007 Ford Escape, front; with rear disc brakes
- Fits 2009-2011 Mercury Mariner, front; steel piston calipers
- Fits 2008 Mercury Mariner, front; rear drum
- Fits 2005-2007 Mercury Mariner, front; rear disc
- Fits 2009-2010 Mazda Tribute, front
- Fits 2008 Mazda Tribute, front; rear drum
- Fits 2005-2006 Mazda Tribute, front; rear disc
Description
DFC 4000 HybriDynamic Brake Pads for Front Disc Brakes
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and everyday drivability. This front disc brake pad set is a hybrid friction design that balances stopping performance with low dust and low noise characteristics for daily use.
The DFC 4000 HybriDynamic Brake Pad line focuses on consistent brake response and practical value. For Ford Escape, Mercury Mariner, and Mazda Tribute front brake service, part number 4000-1047-00 provides a direct-fit pad set for the listed applications.
Key Features
- Hybrid friction material for balanced street performance
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Disc brake pad set with 4 pads included
- Front position application
- Part number 4000-1047-00
Detailed Product Description
The DFC 4000 HybriDynamic Brake Pads use a hybrid friction material composition to deliver predictable braking behavior in everyday driving conditions. Pad dimensions measure 67.3 mm in height, 170.7 mm in width, and 15 mm in overall thickness, with the same sizing for both inner and outer pads. The pads are prepared without a pad wear sensor provision and do not include mounting hardware.
These pads are listed for front brake applications on 2005-2012 Ford Escape, 2005-2011 Mercury Mariner, and 2005-2010 Mazda Tribute, including configurations with steel front caliper pistons, rear drum brakes, or rear disc brakes as noted in the fitment data. If you are searching for front brake pads for a Ford Escape, Mercury Mariner, or Mazda Tribute, part number 4000-1047-00 is the specified DFC HybriDynamic option.
What This Product Helps Address
- Squealing or noisy front brake pads
- Excess brake dust buildup on wheels
- Uneven or inconsistent brake pedal feel
- Reduced braking response from worn front pads
- Front brake service on listed Ford, Mercury, and Mazda vehicles
Installation Notes and Tips
- Verify rotor condition, caliper operation, and pad fitment before installation.
- Mounting hardware is not included, so reuse or replace hardware as needed.
- These pads are not prepared for a pad wear sensor.
- Confirm the vehicle’s front brake configuration against the fitment notes before ordering.
- For best results, clean the caliper bracket and inspect slide pins during brake service.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a brake pad solution focused on consistent response, low dust, and low noise for daily driving. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
- Fits 2009-2012 Ford Escape, front; steel front caliper pistons
- Fits 2008 Ford Escape, front
- Fits 2005 Ford Escape, front
- Fits 2006-2007 Ford Escape, front; with rear disc brakes
- Fits 2009-2011 Mercury Mariner, front; steel piston calipers
- Fits 2008 Mercury Mariner, front; rear drum
- Fits 2005-2007 Mercury Mariner, front; rear disc
- Fits 2009-2010 Mazda Tribute, front
- Fits 2008 Mazda Tribute, front; rear drum
- Fits 2005-2006 Mazda Tribute, front; rear disc
