The Story
Rear Brake Pads for Toyota C-HR
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for rear brake service on select Toyota C-HR models. This disc brake pad set focuses on consistent pedal feel, responsive braking, low dust, and low noise for everyday driving.
Part number 4000-2202-00 is a rear disc brake pad set for 2018-2022 Toyota C-HR applications, including the specific build notes listed below. The DFC 4000 HybriDynamic Brake Pads line is positioned as a value-focused hybrid friction option for drivers who want predictable brake response without sacrificing daily drivability.
Key Features
- Hybrid friction material for balanced braking performance
- Rear disc brake pad set with 4 pads included
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer pad height: 1.996 in. (50.7 mm)
- Inner pad height: 1.917 in. (48.7 mm)
- Pad width: 4.642 in. (117.9 mm)
- Overall thickness: 0.37 in. (9.4 mm)
Detailed Description
DFC 4000 HybriDynamic Brake Pads use a hybrid friction compound to deliver steady pedal feel and dependable brake response in normal street use. The formulation is aimed at drivers who want a straightforward rear brake pad replacement with controlled noise and reduced brake dust. If you are servicing a Toyota C-HR rear brake system, part number 4000-2202-00 provides the pad dimensions and sensor preparation needed for the listed fitments.
Compatible With 2018 Toyota C-HR, rear, from 6/18 made in Japan; 2019 Toyota C-HR, rear; and 2020-2022 Toyota C-HR, rear, 1st digit of VIN is N, made in Turkey. This Toyota C-HR rear brake pad set is a direct fit for the applications shown and is suited to routine brake maintenance on those vehicles.
What It Helps Address
- Squealing or noisy rear brake pads
- Excess brake dust buildup on wheels
- Reduced pedal consistency during everyday driving
- Worn rear pads requiring replacement
- Brake response concerns during normal stop-and-go use
Installation Notes and Tips
Verify the vehicle build details before ordering, especially the 2018 and 2020-2022 Toyota C-HR notes tied to country of manufacture and VIN information. Confirm rear axle application, inspect rotors and caliper hardware during service, and replace pads in axle sets to maintain even braking. Because mounting hardware is not included, reuse only serviceable components or source new hardware separately if needed.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads line as a consistent, value-oriented brake solution for daily driving. Part number 4000-2202-00 is manufactured to match the listed dimensions, sensor preparation, and fitment requirements for the specified Toyota C-HR rear applications.
Description
Rear Brake Pads for Toyota C-HR
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for rear brake service on select Toyota C-HR models. This disc brake pad set focuses on consistent pedal feel, responsive braking, low dust, and low noise for everyday driving.
Part number 4000-2202-00 is a rear disc brake pad set for 2018-2022 Toyota C-HR applications, including the specific build notes listed below. The DFC 4000 HybriDynamic Brake Pads line is positioned as a value-focused hybrid friction option for drivers who want predictable brake response without sacrificing daily drivability.
Key Features
- Hybrid friction material for balanced braking performance
- Rear disc brake pad set with 4 pads included
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer pad height: 1.996 in. (50.7 mm)
- Inner pad height: 1.917 in. (48.7 mm)
- Pad width: 4.642 in. (117.9 mm)
- Overall thickness: 0.37 in. (9.4 mm)
Detailed Description
DFC 4000 HybriDynamic Brake Pads use a hybrid friction compound to deliver steady pedal feel and dependable brake response in normal street use. The formulation is aimed at drivers who want a straightforward rear brake pad replacement with controlled noise and reduced brake dust. If you are servicing a Toyota C-HR rear brake system, part number 4000-2202-00 provides the pad dimensions and sensor preparation needed for the listed fitments.
Compatible With 2018 Toyota C-HR, rear, from 6/18 made in Japan; 2019 Toyota C-HR, rear; and 2020-2022 Toyota C-HR, rear, 1st digit of VIN is N, made in Turkey. This Toyota C-HR rear brake pad set is a direct fit for the applications shown and is suited to routine brake maintenance on those vehicles.
What It Helps Address
- Squealing or noisy rear brake pads
- Excess brake dust buildup on wheels
- Reduced pedal consistency during everyday driving
- Worn rear pads requiring replacement
- Brake response concerns during normal stop-and-go use
Installation Notes and Tips
Verify the vehicle build details before ordering, especially the 2018 and 2020-2022 Toyota C-HR notes tied to country of manufacture and VIN information. Confirm rear axle application, inspect rotors and caliper hardware during service, and replace pads in axle sets to maintain even braking. Because mounting hardware is not included, reuse only serviceable components or source new hardware separately if needed.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads line as a consistent, value-oriented brake solution for daily driving. Part number 4000-2202-00 is manufactured to match the listed dimensions, sensor preparation, and fitment requirements for the specified Toyota C-HR rear applications.
