Original: $159.28
-65%$159.28
$55.75The Story
Brake Kit for Subaru Impreza and BRZ
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-13035, is a front disc brake kit built for select Subaru applications. It combines coated rotors, ceramic pads, and brake hardware components in one service package for front brake replacement on the Subaru Impreza and Subaru BRZ.
Key Features
- Front disc brake kit with coated rotors, ceramic pads, and hardware components
- DFC 3000 ceramic pads for stable friction across a wide temperature range
- Low-dust pad formulation with fade resistance for daily driving
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-pack rotor design that installs without cleaning off oil residue
- Non-directional rotor finish for smoother pad bed-in and quieter stops
Product Details
DFC 3000 Ceramic Brake Pads are formulated for passenger vehicles and light-duty trucks, with emphasis on consistent stopping performance, low dust output, and fade resistance. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the initial bedding period. DFC also uses premium rubber-steel-rubber shims to improve NVH control. The pad formulation meets low-copper requirements for California and Washington regulations.
The GEOSPEC coated rotors are made to G3000/G11H18 cast iron specifications and machined to tight tolerances. Each rotor is processed dry and ready to install, which saves prep time during brake service. The non-directional finish supports even pad bed-in, and vented rotors are balance inspected and corrected when needed. Part number 4312-13035 is a practical choice for front brake service on 2011-2016 Subaru Impreza and 2013-2015 Subaru BRZ front applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during stops
- Excessive brake dust buildup on wheels
- Uneven or inconsistent braking feel
- Rotor surface rust from standard coated or uncoated parts
- Premature wear from fatigued or corroded brake hardware
Installation Notes
Compatible With 2011-2016 Subaru Impreza, front. Compatible With 2013-2015 Subaru BRZ, front; notes: solid rear disc. Inspect calipers, slides, and mounting points before installation, and replace worn hardware as part of the brake service. The coated rotor surface is designed to be swept away by the pad during normal bedding.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected for critical dimensions and balance, and every rotor is checked to confirm OE-spec expectations. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4312-13035 is built as a complete front brake service solution for the listed Subaru applications.
Description
Brake Kit for Subaru Impreza and BRZ
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-13035, is a front disc brake kit built for select Subaru applications. It combines coated rotors, ceramic pads, and brake hardware components in one service package for front brake replacement on the Subaru Impreza and Subaru BRZ.
Key Features
- Front disc brake kit with coated rotors, ceramic pads, and hardware components
- DFC 3000 ceramic pads for stable friction across a wide temperature range
- Low-dust pad formulation with fade resistance for daily driving
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-pack rotor design that installs without cleaning off oil residue
- Non-directional rotor finish for smoother pad bed-in and quieter stops
Product Details
DFC 3000 Ceramic Brake Pads are formulated for passenger vehicles and light-duty trucks, with emphasis on consistent stopping performance, low dust output, and fade resistance. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the initial bedding period. DFC also uses premium rubber-steel-rubber shims to improve NVH control. The pad formulation meets low-copper requirements for California and Washington regulations.
The GEOSPEC coated rotors are made to G3000/G11H18 cast iron specifications and machined to tight tolerances. Each rotor is processed dry and ready to install, which saves prep time during brake service. The non-directional finish supports even pad bed-in, and vented rotors are balance inspected and corrected when needed. Part number 4312-13035 is a practical choice for front brake service on 2011-2016 Subaru Impreza and 2013-2015 Subaru BRZ front applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during stops
- Excessive brake dust buildup on wheels
- Uneven or inconsistent braking feel
- Rotor surface rust from standard coated or uncoated parts
- Premature wear from fatigued or corroded brake hardware
Installation Notes
Compatible With 2011-2016 Subaru Impreza, front. Compatible With 2013-2015 Subaru BRZ, front; notes: solid rear disc. Inspect calipers, slides, and mounting points before installation, and replace worn hardware as part of the brake service. The coated rotor surface is designed to be swept away by the pad during normal bedding.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected for critical dimensions and balance, and every rotor is checked to confirm OE-spec expectations. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4312-13035 is built as a complete front brake service solution for the listed Subaru applications.
