The Story
Brake Kit for Volvo S60, V70, XC70, and S80
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake service solution for select Volvo applications. Part number 4504-27014 combines coated rotors and advanced friction pads in one package for a complete brake refresh.
Compatible With 1999-2009 Volvo S60, V70, XC70, and S80 applications, this kit is built around OE-style rotor dimensions and pad formulations for direct service replacement on the listed vehicles.
Key Features
- Disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to clean off
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification for durability and stability
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line focuses on matched braking components for vehicles that require consistent friction characteristics. DFC formulates its brake pads with OEM friction requirements in mind, then post-cures and scorches each pad to reduce initial break-in time and improve first-stop response. The rotor side uses a coated finish to resist rust better than conventional paint or zinc coatings, while the machined surface and non-directional finish support quieter operation and more even contact with the pad material. Part number 4504-27014 is a practical choice for Volvo S60, Volvo V70, Volvo XC70, and Volvo S80 brake service when both rotors and pads need replacement together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pad material
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Extended brake service time when rotors and pads are replaced separately
Installation Notes and Fitment
- Fits 2008-2009 Volvo S60, front and rear, 286mm front rotors; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2001-2007 Volvo S60, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2001-2007 Volvo V70, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2003-2007 Volvo XC70, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 1999-2006 Volvo S80, front and rear, 286mm front rotors; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
Before installation, confirm rotor size and brake configuration against the vehicle’s existing setup, especially on 2008-2009 Volvo S60 and 1999-2006 Volvo S80 models with 286mm front rotors. Clean all mating surfaces, inspect caliper condition, and follow proper pad bed-in procedures after installation. Part number 4504-27014 is supplied as a complete brake kit for the listed front and rear applications.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. Every rotor includes a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Volvo S60, V70, XC70, and S80
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake service solution for select Volvo applications. Part number 4504-27014 combines coated rotors and advanced friction pads in one package for a complete brake refresh.
Compatible With 1999-2009 Volvo S60, V70, XC70, and S80 applications, this kit is built around OE-style rotor dimensions and pad formulations for direct service replacement on the listed vehicles.
Key Features
- Disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to clean off
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification for durability and stability
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line focuses on matched braking components for vehicles that require consistent friction characteristics. DFC formulates its brake pads with OEM friction requirements in mind, then post-cures and scorches each pad to reduce initial break-in time and improve first-stop response. The rotor side uses a coated finish to resist rust better than conventional paint or zinc coatings, while the machined surface and non-directional finish support quieter operation and more even contact with the pad material. Part number 4504-27014 is a practical choice for Volvo S60, Volvo V70, Volvo XC70, and Volvo S80 brake service when both rotors and pads need replacement together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pad material
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Extended brake service time when rotors and pads are replaced separately
Installation Notes and Fitment
- Fits 2008-2009 Volvo S60, front and rear, 286mm front rotors; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2001-2007 Volvo S60, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2001-2007 Volvo V70, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 2003-2007 Volvo XC70, front and rear, DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
- Fits 1999-2006 Volvo S80, front and rear, 286mm front rotors; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads
Before installation, confirm rotor size and brake configuration against the vehicle’s existing setup, especially on 2008-2009 Volvo S60 and 1999-2006 Volvo S80 models with 286mm front rotors. Clean all mating surfaces, inspect caliper condition, and follow proper pad bed-in procedures after installation. Part number 4504-27014 is supplied as a complete brake kit for the listed front and rear applications.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. Every rotor includes a 12-month warranty against defects in material and workmanship.
