The Story
Rear Brake Kit for Land Rover Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Land Rover models. Part number 4512-11061 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor machining and balance inspection for consistent fit and function
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern braking systems and are assembled with premium shims to improve NVH control. The GEOSPEC coated rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and finished to support smooth braking performance. This kit is designed for rear service on Land Rover Range Rover and Land Rover Range Rover Sport applications, including select Brembo and TRW front-caliper configurations noted in the fitment data. Part number 4512-11061 is a practical choice when you need rear brake components that match OE-style requirements for durability and stability.
Common Problems This Kit Can Address
- Rear brake noise during stops
- Rotor rust and corrosion on exposed braking surfaces
- Uneven pad wear from fatigued hardware
- Brake vibration caused by worn or out-of-spec rotors
- Reduced braking consistency from aged rear pads
Installation Notes
- Confirm rear fitment by year, model, and brake configuration before ordering.
- Inspect calipers, slides, and mounting points during service.
- Clean the rotor surface before installation only if contamination is present; the coating is designed to be installed dry.
- Follow proper bedding procedures after installation for even pad transfer.
- Use the included hardware during the brake service to replace worn retaining components.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and every rotor carries a 12-month warranty against defects in material and workmanship. DFC also post-cures and scorches its brake pads to help deliver stable friction performance from the first stop.
Fitment
- Fits 2025-2026 Land Rover Defender 110, rear.
- Fits 2021 Land Rover Range Rover Sport, rear, 6-piston front calipers.
- Fits 2020 Land Rover Range Rover, rear.
- Fits 2013-2017 Land Rover Range Rover, rear.
- Fits 2018-2020 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models.
- Fits 2017 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models; TRW front calipers; 365mm rear rotors.
- Fits 2014-2017 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models; Brembo front calipers.
Description
Rear Brake Kit for Land Rover Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Land Rover models. Part number 4512-11061 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor machining and balance inspection for consistent fit and function
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern braking systems and are assembled with premium shims to improve NVH control. The GEOSPEC coated rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and finished to support smooth braking performance. This kit is designed for rear service on Land Rover Range Rover and Land Rover Range Rover Sport applications, including select Brembo and TRW front-caliper configurations noted in the fitment data. Part number 4512-11061 is a practical choice when you need rear brake components that match OE-style requirements for durability and stability.
Common Problems This Kit Can Address
- Rear brake noise during stops
- Rotor rust and corrosion on exposed braking surfaces
- Uneven pad wear from fatigued hardware
- Brake vibration caused by worn or out-of-spec rotors
- Reduced braking consistency from aged rear pads
Installation Notes
- Confirm rear fitment by year, model, and brake configuration before ordering.
- Inspect calipers, slides, and mounting points during service.
- Clean the rotor surface before installation only if contamination is present; the coating is designed to be installed dry.
- Follow proper bedding procedures after installation for even pad transfer.
- Use the included hardware during the brake service to replace worn retaining components.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and every rotor carries a 12-month warranty against defects in material and workmanship. DFC also post-cures and scorches its brake pads to help deliver stable friction performance from the first stop.
Fitment
- Fits 2025-2026 Land Rover Defender 110, rear.
- Fits 2021 Land Rover Range Rover Sport, rear, 6-piston front calipers.
- Fits 2020 Land Rover Range Rover, rear.
- Fits 2013-2017 Land Rover Range Rover, rear.
- Fits 2018-2020 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models.
- Fits 2017 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models; TRW front calipers; 365mm rear rotors.
- Fits 2014-2017 Land Rover Range Rover Sport, rear, excluding MHEV and PHEV hybrid models; Brembo front calipers.
