The Story
Front Brake Kit for Chrysler 300 and Dodge Charger
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select Chrysler 300, Dodge Charger, and Dodge Challenger applications. Part number 4512-39044 combines coated rotors, ceramic brake pads, and brake hardware in one package for a complete front brake refresh.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s BrandLine combines coated rotors, advanced ceramic pads, and hardware into a single front brake service solution. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry-packaged design saves prep time during installation. The pads are formulated for stable friction performance and are assembled with shims that help reduce noise, vibration, and harshness. Part number 4512-39044 is built for drivers servicing front brakes on Chrysler 300, Dodge Charger, and Dodge Challenger models where OE-style fit and consistent braking feel matter.
Compatible With 2022-2023 Chrysler 300, front; 2021-2023 Dodge Challenger, front except Brembo calipers; 2021-2023 Dodge Charger, front except Brembo calipers; 2011-2021 Chrysler 300, front; 2012-2020 Dodge Charger, front; 2019-2020 Dodge Charger, front except Brembo calipers; 2017-2018 Dodge Challenger, front; 2014 Dodge Challenger, front; 2007 Dodge Charger, front without Daytona Package, vented rear rotors, 320 x 22mm rotors.
Common Problems This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction components
- Brake vibration or rough pedal feel from rotor wear
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper bedding procedures after installation to help the pads and rotors mate evenly. Verify front fitment details carefully, especially Brembo and package-specific exclusions on certain Dodge Charger and Dodge Challenger models. Part number 4512-39044 is intended for front axle service only.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented applications. The rotors carry a 12-month warranty against defects in material and workmanship.
Description
Front Brake Kit for Chrysler 300 and Dodge Charger
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select Chrysler 300, Dodge Charger, and Dodge Challenger applications. Part number 4512-39044 combines coated rotors, ceramic brake pads, and brake hardware in one package for a complete front brake refresh.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s BrandLine combines coated rotors, advanced ceramic pads, and hardware into a single front brake service solution. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry-packaged design saves prep time during installation. The pads are formulated for stable friction performance and are assembled with shims that help reduce noise, vibration, and harshness. Part number 4512-39044 is built for drivers servicing front brakes on Chrysler 300, Dodge Charger, and Dodge Challenger models where OE-style fit and consistent braking feel matter.
Compatible With 2022-2023 Chrysler 300, front; 2021-2023 Dodge Challenger, front except Brembo calipers; 2021-2023 Dodge Charger, front except Brembo calipers; 2011-2021 Chrysler 300, front; 2012-2020 Dodge Charger, front; 2019-2020 Dodge Charger, front except Brembo calipers; 2017-2018 Dodge Challenger, front; 2014 Dodge Challenger, front; 2007 Dodge Charger, front without Daytona Package, vented rear rotors, 320 x 22mm rotors.
Common Problems This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction components
- Brake vibration or rough pedal feel from rotor wear
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper bedding procedures after installation to help the pads and rotors mate evenly. Verify front fitment details carefully, especially Brembo and package-specific exclusions on certain Dodge Charger and Dodge Challenger models. Part number 4512-39044 is intended for front axle service only.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented applications. The rotors carry a 12-month warranty against defects in material and workmanship.
