The Story
Rear Brake Kit for Mercedes-Benz 300SD, 300SE, and More
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a rear disc brake service kit built for select Mercedes-Benz applications with Bendix calipers. Part number 4512-63117 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake service on classic Mercedes-Benz sedans and coupes.
For drivers searching for a rear brake kit for 1975-1991 Mercedes-Benz 300D, 300SD, 300SE, 300SEL, 300SDL, 350SD, 350SDL, 380SE, 380SEC, 380SEL, or 420SEL, this kit is engineered to match OE-style fitment and braking behavior.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware
- Fits select Mercedes-Benz rear brake applications with Bendix calipers
- Coated rotor finish helps resist rust and arrives dry, ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Post-cured, scorched pads are built for stable friction performance from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC Friction builds this brake service kit around OE-focused components for rear axle service on Mercedes-Benz models from 1975 through 1991. The GEOSPEC rotors use a silver-gray protective coating to fight corrosion, while the cast iron rotor design is machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction and reduced break-in time, and the included hardware is designed to restore proper caliper movement and spring tension.
This part number, 4512-63117, is a practical choice for rear brake replacement on Mercedes-Benz 300SD, 300SE, and related chassis where Bendix rear calipers are specified. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on uncoated rotors
- Longer stopping distances from worn rear brake components
- Brake vibration from rotors that are out of balance or unevenly finished
Installation Notes
Confirm rear fitment by year, model, and caliper type before ordering. This kit is listed for rear applications only and includes notes for Bendix front and rear calipers or Bendix rear calipers depending on the vehicle. Clean the rotor friction surface before installation if needed, and follow proper brake bedding procedures after service. Part number 4512-63117 is intended for direct replacement on the listed Mercedes-Benz rear brake applications.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Compatible Vehicles
- Fits 1991 Mercedes-Benz 300SE, rear, Vehicle Production Date To 3/91; Bendix Front & Rear Calipers
- Fits 1988-1991 Mercedes-Benz 300SEL, rear, with Bendix Front & Rear Calipers
- Fits 1991 Mercedes-Benz 350SD, rear, Bendix Front & Rear Calipers
- Fits 1990-1991 Mercedes-Benz 350SDL, rear, Bendix Calipers
- Fits 1986-1991 Mercedes-Benz 420SEL, rear, Bendix Calipers
- Fits 1988-1990 Mercedes-Benz 300SE, rear, Disc Brake Hardware Kit fits Bendix Rear Calipers
- Fits 1986-1987 Mercedes-Benz 300SDL, rear, Bendix Calipers
- Fits 1975-1985 Mercedes-Benz 300D, rear, Bendix Front & Rear Calipers
- Fits 1985 Mercedes-Benz 300SD, rear, Vehicle Production Date To 9/85; Bendix Rear Calipers
- Fits 1985 Mercedes-Benz 300SD, rear, Vehicle Production Date From 9/85; Bendix Calipers
- Fits 1984-1985 Mercedes-Benz 380SE, rear, Bendix Calipers
- Fits 1980-1984 Mercedes-Benz 300SD, rear, Disc Brake Hardware Kit fits Bendix Rear Calipers
- Fits 1982-1983 Mercedes-Benz 380SEC, rear, Bendix Calipers
- Fits 1981-1983 Mercedes-Benz 380SEL, rear, Bendix Calipers
- Fits 1979 Mercedes-Benz 300SD, rear, Vehicle Production Date To 8/79; Bendix Calipers
- Fits 1979 Mercedes-Benz 300SD, rear, Vehicle Production Date From 9/79; Bendix Calipers
- Fits 1978 Mercedes-Benz 300SD, rear, with Bendix Calipers
Description
Rear Brake Kit for Mercedes-Benz 300SD, 300SE, and More
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a rear disc brake service kit built for select Mercedes-Benz applications with Bendix calipers. Part number 4512-63117 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake service on classic Mercedes-Benz sedans and coupes.
For drivers searching for a rear brake kit for 1975-1991 Mercedes-Benz 300D, 300SD, 300SE, 300SEL, 300SDL, 350SD, 350SDL, 380SE, 380SEC, 380SEL, or 420SEL, this kit is engineered to match OE-style fitment and braking behavior.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and hardware
- Fits select Mercedes-Benz rear brake applications with Bendix calipers
- Coated rotor finish helps resist rust and arrives dry, ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Post-cured, scorched pads are built for stable friction performance from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC Friction builds this brake service kit around OE-focused components for rear axle service on Mercedes-Benz models from 1975 through 1991. The GEOSPEC rotors use a silver-gray protective coating to fight corrosion, while the cast iron rotor design is machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction and reduced break-in time, and the included hardware is designed to restore proper caliper movement and spring tension.
This part number, 4512-63117, is a practical choice for rear brake replacement on Mercedes-Benz 300SD, 300SE, and related chassis where Bendix rear calipers are specified. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on uncoated rotors
- Longer stopping distances from worn rear brake components
- Brake vibration from rotors that are out of balance or unevenly finished
Installation Notes
Confirm rear fitment by year, model, and caliper type before ordering. This kit is listed for rear applications only and includes notes for Bendix front and rear calipers or Bendix rear calipers depending on the vehicle. Clean the rotor friction surface before installation if needed, and follow proper brake bedding procedures after service. Part number 4512-63117 is intended for direct replacement on the listed Mercedes-Benz rear brake applications.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Compatible Vehicles
- Fits 1991 Mercedes-Benz 300SE, rear, Vehicle Production Date To 3/91; Bendix Front & Rear Calipers
- Fits 1988-1991 Mercedes-Benz 300SEL, rear, with Bendix Front & Rear Calipers
- Fits 1991 Mercedes-Benz 350SD, rear, Bendix Front & Rear Calipers
- Fits 1990-1991 Mercedes-Benz 350SDL, rear, Bendix Calipers
- Fits 1986-1991 Mercedes-Benz 420SEL, rear, Bendix Calipers
- Fits 1988-1990 Mercedes-Benz 300SE, rear, Disc Brake Hardware Kit fits Bendix Rear Calipers
- Fits 1986-1987 Mercedes-Benz 300SDL, rear, Bendix Calipers
- Fits 1975-1985 Mercedes-Benz 300D, rear, Bendix Front & Rear Calipers
- Fits 1985 Mercedes-Benz 300SD, rear, Vehicle Production Date To 9/85; Bendix Rear Calipers
- Fits 1985 Mercedes-Benz 300SD, rear, Vehicle Production Date From 9/85; Bendix Calipers
- Fits 1984-1985 Mercedes-Benz 380SE, rear, Bendix Calipers
- Fits 1980-1984 Mercedes-Benz 300SD, rear, Disc Brake Hardware Kit fits Bendix Rear Calipers
- Fits 1982-1983 Mercedes-Benz 380SEC, rear, Bendix Calipers
- Fits 1981-1983 Mercedes-Benz 380SEL, rear, Bendix Calipers
- Fits 1979 Mercedes-Benz 300SD, rear, Vehicle Production Date To 8/79; Bendix Calipers
- Fits 1979 Mercedes-Benz 300SD, rear, Vehicle Production Date From 9/79; Bendix Calipers
- Fits 1978 Mercedes-Benz 300SD, rear, with Bendix Calipers
