The Story
Brake Kit for Jaguar XJ8 and Vanden Plas
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-20015, is a front and rear brake service kit for select 1998-2003 Jaguar XJ8 and Jaguar Vanden Plas models. It combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Built for drivers looking for a direct-fit brake kit for 1998-2003 Jaguar XJ8 and Vanden Plas applications, this DFC setup focuses on OE-style fitment, corrosion resistance, and consistent pedal response. Part number 4514-20015 is engineered for everyday street use where quiet operation and stable braking matter.
Key Features
- Compatible with 1998-2003 Jaguar XJ8 and Jaguar Vanden Plas, front and rear
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish supports even pad bed-in and smoother stops
Product Details
DFC designed this brake service kit to match OE form, fit, and function for the Jaguar XJ8 and Jaguar Vanden Plas. The coated rotors are made from G3000/G11H18 cast iron, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims to help control brake noise and harshness. The hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear, caliper movement, and noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping consistency from worn rotors
- Longer brake service time caused by oil-coated replacement rotors
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify fitment by year, make, model, and axle position before installation. For 1998-2003 Jaguar XJ8 and Vanden Plas brake service, inspect calipers, slides, and mounting points for wear before reassembly. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical specifications, and vented rotors are balance-checked and corrected when needed. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-20015 is built for consistent performance across the listed Jaguar applications.
Description
Brake Kit for Jaguar XJ8 and Vanden Plas
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-20015, is a front and rear brake service kit for select 1998-2003 Jaguar XJ8 and Jaguar Vanden Plas models. It combines coated rotors, low metallic pads, and brake hardware components in one package for a complete brake refresh.
Built for drivers looking for a direct-fit brake kit for 1998-2003 Jaguar XJ8 and Vanden Plas applications, this DFC setup focuses on OE-style fitment, corrosion resistance, and consistent pedal response. Part number 4514-20015 is engineered for everyday street use where quiet operation and stable braking matter.
Key Features
- Compatible with 1998-2003 Jaguar XJ8 and Jaguar Vanden Plas, front and rear
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish supports even pad bed-in and smoother stops
Product Details
DFC designed this brake service kit to match OE form, fit, and function for the Jaguar XJ8 and Jaguar Vanden Plas. The coated rotors are made from G3000/G11H18 cast iron, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims to help control brake noise and harshness. The hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear, caliper movement, and noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping consistency from worn rotors
- Longer brake service time caused by oil-coated replacement rotors
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify fitment by year, make, model, and axle position before installation. For 1998-2003 Jaguar XJ8 and Vanden Plas brake service, inspect calipers, slides, and mounting points for wear before reassembly. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical specifications, and vented rotors are balance-checked and corrected when needed. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-20015 is built for consistent performance across the listed Jaguar applications.
