The Story
Brake Kit for Express 3500 and Savana 3500
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is built for front and rear brake service on select 2018-2020 Chevrolet Express 3500 and GMC Savana 3500 models with a 3.42" gear ratio. Part number 4514-48062 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Use this kit when you need a direct-fit brake service solution for Chevrolet Express 3500 and GMC Savana 3500 vans that require consistent stopping performance, reduced brake noise, and corrosion-resistant rotor surfaces. Part number 4514-48062 is organized for axle-level service and is suited to routine brake replacement on fleet and commercial vehicles.
Key Features
- Fits 2018-2020 Chevrolet Express 3500, front and rear, 3.42" gear ratio
- Fits 2018-2020 GMC Savana 3500, front and rear, 3.42" gear ratio
- DFC 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating for faster brake service
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is engineered around OE-style fit, finish, and serviceability. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact and quieter operation. The coated rotor surface helps resist rust and arrives dry, so there is no oil film to remove before installation. The pads are post-cured for stable friction behavior and assembled with shims that help manage vibration and noise. Part number 4514-48062 is a practical brake service choice for Chevrolet Express 3500 and GMC Savana 3500 owners maintaining front and rear braking systems.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during stops
- Uneven pad wear from fatigued hardware
- Rust buildup on rotor surfaces
- Longer pedal feel changes from worn friction components
- Reduced braking consistency during routine service intervals
Installation Notes
Verify the vehicle’s 3.42" gear ratio before ordering. This kit is listed for front and rear service on the specified Chevrolet Express 3500 and GMC Savana 3500 applications, so match the axle position to the repair being performed. Clean the hub face before rotor installation, follow proper torque procedures, and complete a controlled bed-in after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and the finished rotors are checked against OE specifications. The rotors carry a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to support consistent service performance across the listed applications.
Description
Brake Kit for Express 3500 and Savana 3500
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is built for front and rear brake service on select 2018-2020 Chevrolet Express 3500 and GMC Savana 3500 models with a 3.42" gear ratio. Part number 4514-48062 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Use this kit when you need a direct-fit brake service solution for Chevrolet Express 3500 and GMC Savana 3500 vans that require consistent stopping performance, reduced brake noise, and corrosion-resistant rotor surfaces. Part number 4514-48062 is organized for axle-level service and is suited to routine brake replacement on fleet and commercial vehicles.
Key Features
- Fits 2018-2020 Chevrolet Express 3500, front and rear, 3.42" gear ratio
- Fits 2018-2020 GMC Savana 3500, front and rear, 3.42" gear ratio
- DFC 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating for faster brake service
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is engineered around OE-style fit, finish, and serviceability. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact and quieter operation. The coated rotor surface helps resist rust and arrives dry, so there is no oil film to remove before installation. The pads are post-cured for stable friction behavior and assembled with shims that help manage vibration and noise. Part number 4514-48062 is a practical brake service choice for Chevrolet Express 3500 and GMC Savana 3500 owners maintaining front and rear braking systems.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during stops
- Uneven pad wear from fatigued hardware
- Rust buildup on rotor surfaces
- Longer pedal feel changes from worn friction components
- Reduced braking consistency during routine service intervals
Installation Notes
Verify the vehicle’s 3.42" gear ratio before ordering. This kit is listed for front and rear service on the specified Chevrolet Express 3500 and GMC Savana 3500 applications, so match the axle position to the repair being performed. Clean the hub face before rotor installation, follow proper torque procedures, and complete a controlled bed-in after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and the finished rotors are checked against OE specifications. The rotors carry a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to support consistent service performance across the listed applications.
