Original: $636.58
-65%$636.58
$222.80The Story
Brake Kit for Audi A8 Quattro and S8
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service on select Audi applications. Part number 4514-73031 combines coated rotors, low metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by combining matched rotors, pads, and hardware for the same axle set. The GEOSPEC rotor line focuses on corrosion protection and OE-style fitment, while the 5000 Advanced pad line is formulated for stable friction performance and controlled noise characteristics.
Detailed Description
Part number 4514-73031 is engineered for drivers servicing a 2005-2010 Audi A8 Quattro, front and rear, or a 2007-2009 Audi S8, front and rear. The coated rotors are machined to tight tolerances, inspected for balance on vented designs, and finished to support smooth braking performance. The low metallic pads are built for consistent friction output, and the included hardware kit addresses worn or corroded brake clips and related components during service. This kit is a practical choice for Audi A8 Quattro brake replacement and Audi S8 brake service when you want matched components in one package.
Common Brake Issues This Kit Addresses
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged clips and retainers
- Reduced braking smoothness from worn rotor surfaces
- Longer brake service time from cleaning oil-coated rotors
Installation Notes and Tips
Compatible With 2005-2010 Audi A8 Quattro, front and rear, and 2007-2009 Audi S8, front and rear. Verify axle coverage before ordering, and inspect calipers, slides, and mounting points during brake service. Clean all hub surfaces before rotor installation, follow proper torque procedures, and complete a careful bed-in cycle after installation to help the pads and rotors seat evenly. Part number 4514-73031 is designed for straightforward brake replacement on the listed Audi models.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, processed with a non-directional finish, and 100% inspected for critical dimensions and balance where applicable. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Audi A8 Quattro and S8
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service on select Audi applications. Part number 4514-73031 combines coated rotors, low metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by combining matched rotors, pads, and hardware for the same axle set. The GEOSPEC rotor line focuses on corrosion protection and OE-style fitment, while the 5000 Advanced pad line is formulated for stable friction performance and controlled noise characteristics.
Detailed Description
Part number 4514-73031 is engineered for drivers servicing a 2005-2010 Audi A8 Quattro, front and rear, or a 2007-2009 Audi S8, front and rear. The coated rotors are machined to tight tolerances, inspected for balance on vented designs, and finished to support smooth braking performance. The low metallic pads are built for consistent friction output, and the included hardware kit addresses worn or corroded brake clips and related components during service. This kit is a practical choice for Audi A8 Quattro brake replacement and Audi S8 brake service when you want matched components in one package.
Common Brake Issues This Kit Addresses
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged clips and retainers
- Reduced braking smoothness from worn rotor surfaces
- Longer brake service time from cleaning oil-coated rotors
Installation Notes and Tips
Compatible With 2005-2010 Audi A8 Quattro, front and rear, and 2007-2009 Audi S8, front and rear. Verify axle coverage before ordering, and inspect calipers, slides, and mounting points during brake service. Clean all hub surfaces before rotor installation, follow proper torque procedures, and complete a careful bed-in cycle after installation to help the pads and rotors seat evenly. Part number 4514-73031 is designed for straightforward brake replacement on the listed Audi models.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, processed with a non-directional finish, and 100% inspected for critical dimensions and balance where applicable. The rotors include a 12-month warranty against defects in material and workmanship.
