The Story
Dynamite Friction DFC Brake Rotor 600-74003
The Dynamite Friction DFC Brake Rotor 600-74003 is a solid disc brake rotor built to match the listed dimensions for a precise brake service replacement. With a 278 mm outside diameter, 83.8 mm height, and 4-bolt pattern with 14x1.5 bolt holes, it is suited for applications that require this exact rotor specification.
Key Features
- Part number: 600-74003
- DFC Brake Rotor product line from Dynamite Friction
- Solid disc brake rotor design
- Outside diameter: 278 mm
- Height: 83.8 mm
- Nominal thickness: 9.5 mm
- Discard thickness: 8 mm
- Inside diameter: 78.5 mm
- 4 bolt holes with 14x1.5 bolt hole diameter
Detailed Description
This Dynamite Friction brake rotor is part of the DFC Brake Rotor line, a product line focused on replacement rotors for vehicles that require specific OE-style dimensions. The 600-74003 rotor uses a solid construction and the listed thickness and diameter measurements to support proper brake system fitment where this rotor specification is called for. For shoppers searching brake rotor replacement for Honda Civic or similar compact vehicle applications, the 600-74003 provides a direct-spec reference point based on its measured dimensions.
Use this rotor when you need a replacement disc brake rotor that matches the required 278 mm outside diameter, 9.5 mm nominal thickness, and 4-bolt configuration. The part number 600-74003 is also useful when cross-checking brake service parts for Honda Civic brake rotor replacement searches and other vehicle-specific brake maintenance needs.
What It Helps Address
- Brake pulsation caused by worn rotor surfaces
- Reduced braking consistency from rotor wear
- Rotor replacement after thickness reaches discard limits
- Brake service needs on vehicles using a 278 mm solid rotor
- Fitment matching for 4-bolt, 14x1.5 rotor applications
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub measurements before installation. Confirm that the vehicle uses a solid rotor with the listed 278 mm outside diameter, 83.8 mm height, and 78.5 mm inside diameter. For best results, inspect pads, caliper condition, and hub mounting surfaces during brake service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Dynamite Friction identifies this rotor within its DFC Brake Rotor line, and the published specifications provide the key measurements needed for parts matching and brake system service. Part number 600-74003 should be confirmed against the vehicle’s required rotor dimensions before purchase.
Description
Dynamite Friction DFC Brake Rotor 600-74003
The Dynamite Friction DFC Brake Rotor 600-74003 is a solid disc brake rotor built to match the listed dimensions for a precise brake service replacement. With a 278 mm outside diameter, 83.8 mm height, and 4-bolt pattern with 14x1.5 bolt holes, it is suited for applications that require this exact rotor specification.
Key Features
- Part number: 600-74003
- DFC Brake Rotor product line from Dynamite Friction
- Solid disc brake rotor design
- Outside diameter: 278 mm
- Height: 83.8 mm
- Nominal thickness: 9.5 mm
- Discard thickness: 8 mm
- Inside diameter: 78.5 mm
- 4 bolt holes with 14x1.5 bolt hole diameter
Detailed Description
This Dynamite Friction brake rotor is part of the DFC Brake Rotor line, a product line focused on replacement rotors for vehicles that require specific OE-style dimensions. The 600-74003 rotor uses a solid construction and the listed thickness and diameter measurements to support proper brake system fitment where this rotor specification is called for. For shoppers searching brake rotor replacement for Honda Civic or similar compact vehicle applications, the 600-74003 provides a direct-spec reference point based on its measured dimensions.
Use this rotor when you need a replacement disc brake rotor that matches the required 278 mm outside diameter, 9.5 mm nominal thickness, and 4-bolt configuration. The part number 600-74003 is also useful when cross-checking brake service parts for Honda Civic brake rotor replacement searches and other vehicle-specific brake maintenance needs.
What It Helps Address
- Brake pulsation caused by worn rotor surfaces
- Reduced braking consistency from rotor wear
- Rotor replacement after thickness reaches discard limits
- Brake service needs on vehicles using a 278 mm solid rotor
- Fitment matching for 4-bolt, 14x1.5 rotor applications
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub measurements before installation. Confirm that the vehicle uses a solid rotor with the listed 278 mm outside diameter, 83.8 mm height, and 78.5 mm inside diameter. For best results, inspect pads, caliper condition, and hub mounting surfaces during brake service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Dynamite Friction identifies this rotor within its DFC Brake Rotor line, and the published specifications provide the key measurements needed for parts matching and brake system service. Part number 600-74003 should be confirmed against the vehicle’s required rotor dimensions before purchase.
