The Story
Rear Right Drilled and Slotted Rotor for Genesis Coupe
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-03033R, is a rear right disc brake rotor for select Hyundai Genesis Coupe applications. It combines a slotted X drilled surface with a zinc silver hat finish and rust resistant coating for a clean, service-ready appearance.
Key Features
- Part number 631-03033R for rear right brake service
- Fits 2010-2016 Hyundai Genesis Coupe, rear right
- Slotted X drilled surface type for consistent rotor performance
- Solid rotor construction with 314 mm outside diameter
- Zinc silver hat finish with rust resistant coating
- 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
- Directional brake surface for the specified application
Product Details
This DFC Brake Rotor is built around the fitment requirements of the Hyundai Genesis Coupe rear right position from 2010 through 2016, including Mando Brakes 1-piston caliper applications. The rotor measures 314 mm in outside diameter, 60.6 mm in overall height, and 13 mm nominal thickness, with an 11.4 mm discard thickness. The 69 mm center hole diameter and 12.5 mm bolt hole diameter support the specified hub and wheel mounting dimensions. The DFC Brake Rotor - Drilled and Slotted - Silver line focuses on a drilled and slotted braking surface paired with corrosion-resistant finishing for a cleaner look and dependable replacement fitment. Part number 631-03033R is a direct match for this rear right position on the Hyundai Genesis Coupe.
Common Problems This Rotor Can Address
- Rear brake rotor wear on a Hyundai Genesis Coupe
- Rotor scoring or uneven braking surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Brake pulsation related to rotor thickness loss
- Replacement needs for the rear right brake position
Installation Notes and Tips
Verify rear right fitment before installation and confirm the vehicle uses Mando Brakes 1-piston calipers for the listed application. Match the rotor to the directional surface orientation and inspect pad condition, caliper hardware, and hub surfaces during service. Confirm the 5-lug, 114.3 mm bolt circle and 69 mm center bore before final assembly. For search reference, this part cross-references no additional part numbers in the provided data.
Quality Assurance
Dynamite Friction identifies this rotor as a drilled and slotted replacement with rust resistant coating and zinc silver hat finish for the specified Hyundai Genesis Coupe rear right application. Part number 631-03033R is listed for 2010-2016 Hyundai Genesis Coupe, rear right, and should be matched to the vehicle’s brake configuration before installation.
Description
Rear Right Drilled and Slotted Rotor for Genesis Coupe
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-03033R, is a rear right disc brake rotor for select Hyundai Genesis Coupe applications. It combines a slotted X drilled surface with a zinc silver hat finish and rust resistant coating for a clean, service-ready appearance.
Key Features
- Part number 631-03033R for rear right brake service
- Fits 2010-2016 Hyundai Genesis Coupe, rear right
- Slotted X drilled surface type for consistent rotor performance
- Solid rotor construction with 314 mm outside diameter
- Zinc silver hat finish with rust resistant coating
- 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
- Directional brake surface for the specified application
Product Details
This DFC Brake Rotor is built around the fitment requirements of the Hyundai Genesis Coupe rear right position from 2010 through 2016, including Mando Brakes 1-piston caliper applications. The rotor measures 314 mm in outside diameter, 60.6 mm in overall height, and 13 mm nominal thickness, with an 11.4 mm discard thickness. The 69 mm center hole diameter and 12.5 mm bolt hole diameter support the specified hub and wheel mounting dimensions. The DFC Brake Rotor - Drilled and Slotted - Silver line focuses on a drilled and slotted braking surface paired with corrosion-resistant finishing for a cleaner look and dependable replacement fitment. Part number 631-03033R is a direct match for this rear right position on the Hyundai Genesis Coupe.
Common Problems This Rotor Can Address
- Rear brake rotor wear on a Hyundai Genesis Coupe
- Rotor scoring or uneven braking surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Brake pulsation related to rotor thickness loss
- Replacement needs for the rear right brake position
Installation Notes and Tips
Verify rear right fitment before installation and confirm the vehicle uses Mando Brakes 1-piston calipers for the listed application. Match the rotor to the directional surface orientation and inspect pad condition, caliper hardware, and hub surfaces during service. Confirm the 5-lug, 114.3 mm bolt circle and 69 mm center bore before final assembly. For search reference, this part cross-references no additional part numbers in the provided data.
Quality Assurance
Dynamite Friction identifies this rotor as a drilled and slotted replacement with rust resistant coating and zinc silver hat finish for the specified Hyundai Genesis Coupe rear right application. Part number 631-03033R is listed for 2010-2016 Hyundai Genesis Coupe, rear right, and should be matched to the vehicle’s brake configuration before installation.
