Original: $96.42
-65%$96.42
$33.75The Story
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-76065R, is a rear right disc brake rotor for select Toyota Avalon applications. It combines a slotted X-drilled surface with a zinc silver hat finish and rust-resistant coating for a clean, service-ready appearance.
Fits 1995-1999 Toyota Avalon, rear right. This rotor is built around the listed OE-style dimensions, including a 291 mm outside diameter, 64.7 mm overall height, 62.1 mm center hole diameter, and 5-lug, 114.3 mm bolt circle fitment.
Key Features
- Part number 631-76065R
- Rear right disc brake rotor for 1995-1999 Toyota Avalon
- Slotted X-drilled brake surface for directional braking performance
- Rust-resistant coating for added corrosion protection
- Zinc silver hat finish
- 5-bolt, 5-lug design with 114.3 mm bolt circle diameter
- Solid rotor construction
- Nominal thickness: 9 mm; discard thickness: 8 mm
Product Details
The DFC Brake Rotor - Drilled and Slotted - Silver line focuses on application-specific brake rotors with a directional surface pattern and corrosion-resistant finish. On this Toyota Avalon rear right rotor, the plain disc finish, slotted X-drilled surface, and silver hat coating provide a clean replacement option that matches the listed dimensions and mounting layout. The part number 631-76065R is the correct reference when verifying this rear right rotor for 1995-1999 Toyota Avalon fitment.
Compatible With 1995-1999 Toyota Avalon rear right brake rotor applications, this rotor is specified with a 291 mm outside diameter, 64.7 mm height, 14.5 mm stud/lug hole diameter, and 62.1 mm center hole diameter. The directional brake surface is intended for the listed orientation, so side-specific installation matters when ordering and replacing the rotor.
What It Helps Address
- Brake rotor wear that requires replacement at or near discard thickness
- Corrosion on the rotor hat or exposed metal surfaces
- Uneven braking feel from a worn rear right rotor
- Surface glazing or heat-related rotor condition on the rear axle
- Fitment issues when replacing a rear right Toyota Avalon rotor
Installation Notes
Verify rear right position, bolt circle diameter, center hole diameter, and overall height before installation. Because this rotor uses a directional brake surface, install it on the correct side and confirm the rotor orientation matches the vehicle layout. Always inspect pads, caliper condition, and hub surfaces during brake service to help ensure proper rotor seating.
Quality Assurance
Dynamite Friction identifies this rotor by precise dimensional and finish specifications, including rust-resistant coating and zinc silver hat finish, to support consistent replacement selection. Part number 631-76065R should be matched to the confirmed 1995-1999 Toyota Avalon rear right application before purchase or installation.
Description
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-76065R, is a rear right disc brake rotor for select Toyota Avalon applications. It combines a slotted X-drilled surface with a zinc silver hat finish and rust-resistant coating for a clean, service-ready appearance.
Fits 1995-1999 Toyota Avalon, rear right. This rotor is built around the listed OE-style dimensions, including a 291 mm outside diameter, 64.7 mm overall height, 62.1 mm center hole diameter, and 5-lug, 114.3 mm bolt circle fitment.
Key Features
- Part number 631-76065R
- Rear right disc brake rotor for 1995-1999 Toyota Avalon
- Slotted X-drilled brake surface for directional braking performance
- Rust-resistant coating for added corrosion protection
- Zinc silver hat finish
- 5-bolt, 5-lug design with 114.3 mm bolt circle diameter
- Solid rotor construction
- Nominal thickness: 9 mm; discard thickness: 8 mm
Product Details
The DFC Brake Rotor - Drilled and Slotted - Silver line focuses on application-specific brake rotors with a directional surface pattern and corrosion-resistant finish. On this Toyota Avalon rear right rotor, the plain disc finish, slotted X-drilled surface, and silver hat coating provide a clean replacement option that matches the listed dimensions and mounting layout. The part number 631-76065R is the correct reference when verifying this rear right rotor for 1995-1999 Toyota Avalon fitment.
Compatible With 1995-1999 Toyota Avalon rear right brake rotor applications, this rotor is specified with a 291 mm outside diameter, 64.7 mm height, 14.5 mm stud/lug hole diameter, and 62.1 mm center hole diameter. The directional brake surface is intended for the listed orientation, so side-specific installation matters when ordering and replacing the rotor.
What It Helps Address
- Brake rotor wear that requires replacement at or near discard thickness
- Corrosion on the rotor hat or exposed metal surfaces
- Uneven braking feel from a worn rear right rotor
- Surface glazing or heat-related rotor condition on the rear axle
- Fitment issues when replacing a rear right Toyota Avalon rotor
Installation Notes
Verify rear right position, bolt circle diameter, center hole diameter, and overall height before installation. Because this rotor uses a directional brake surface, install it on the correct side and confirm the rotor orientation matches the vehicle layout. Always inspect pads, caliper condition, and hub surfaces during brake service to help ensure proper rotor seating.
Quality Assurance
Dynamite Friction identifies this rotor by precise dimensional and finish specifications, including rust-resistant coating and zinc silver hat finish, to support consistent replacement selection. Part number 631-76065R should be matched to the confirmed 1995-1999 Toyota Avalon rear right application before purchase or installation.
