Original: $160.74
-65%$160.74
$56.26The Story
Front Left Drilled and Slotted Rotor for Subaru Forester
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-13045L, is a front left disc brake rotor built for 316 mm front disc applications. It is compatible with 2019-2024 Subaru Forester models in the front left position and uses a directional, slotted X drilled surface for consistent brake contact.
With a vented rotor design, 5 bolt holes, a 114.3 mm bolt circle diameter, and a zinc black hat finish, this rotor is built around the fitment and dimensions needed for the Subaru Forester front brake setup. The rust resistant coating adds protection for exposed brake components, while the plain disc finish and black hat finish provide a clean OE-style appearance.
Key Features
- Part number 633-13045L for front left brake rotor replacement
- Fits 2019-2024 Subaru Forester, front left
- 316 mm outside diameter for the specified front disc application
- Slotted X drilled surface type for directional braking performance
- Vented rotor construction for front axle use
- Rust resistant coating with zinc black hat finish
- 5 bolt holes, 5 lug holes, and 114.3 mm bolt circle diameter
- Nominal thickness: 28 mm; discard thickness: 26 mm
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on application-specific brake rotors with drilled and slotted surfaces and corrosion-resistant finishes. For Subaru Forester brake service, this rotor matches the front left position and the 316 mm front disc specification used across the listed model years. The directional braking surface is intended for the correct rotation orientation, so verifying left-side placement before installation is important. If you are searching for a Subaru Forester front left brake rotor 316 mm or a 2019-2024 Subaru Forester drilled and slotted rotor, part number 633-13045L matches the confirmed fitment data.
Common Brake Issues It Can Address
- Worn front left rotor surface from normal brake use
- Brake pulsation caused by rotor wear or uneven surface condition
- Corrosion on the rotor hat or exposed braking surfaces
- Reduced braking consistency from an out-of-spec rotor
- Noise or vibration associated with a damaged front disc rotor
Installation Notes and Tips
Confirm the vehicle is a 2019-2024 Subaru Forester and verify the front left position before ordering or installing part number 633-13045L. Match the 316 mm front disc specification, 5-lug pattern, and directional rotor orientation to the existing brake setup. Inspect pads, caliper condition, and hub surface during service, and clean the mounting area before rotor installation to help ensure proper seating.
Quality Assurance
This rotor is built with a rust resistant coating and zinc black hat finish for added corrosion protection in brake service environments. The DFC Brake Rotor - Drilled and Slotted - Black product line emphasizes application-specific dimensions and finish details for direct-fit brake replacement on the listed Subaru Forester models.
Description
Front Left Drilled and Slotted Rotor for Subaru Forester
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-13045L, is a front left disc brake rotor built for 316 mm front disc applications. It is compatible with 2019-2024 Subaru Forester models in the front left position and uses a directional, slotted X drilled surface for consistent brake contact.
With a vented rotor design, 5 bolt holes, a 114.3 mm bolt circle diameter, and a zinc black hat finish, this rotor is built around the fitment and dimensions needed for the Subaru Forester front brake setup. The rust resistant coating adds protection for exposed brake components, while the plain disc finish and black hat finish provide a clean OE-style appearance.
Key Features
- Part number 633-13045L for front left brake rotor replacement
- Fits 2019-2024 Subaru Forester, front left
- 316 mm outside diameter for the specified front disc application
- Slotted X drilled surface type for directional braking performance
- Vented rotor construction for front axle use
- Rust resistant coating with zinc black hat finish
- 5 bolt holes, 5 lug holes, and 114.3 mm bolt circle diameter
- Nominal thickness: 28 mm; discard thickness: 26 mm
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on application-specific brake rotors with drilled and slotted surfaces and corrosion-resistant finishes. For Subaru Forester brake service, this rotor matches the front left position and the 316 mm front disc specification used across the listed model years. The directional braking surface is intended for the correct rotation orientation, so verifying left-side placement before installation is important. If you are searching for a Subaru Forester front left brake rotor 316 mm or a 2019-2024 Subaru Forester drilled and slotted rotor, part number 633-13045L matches the confirmed fitment data.
Common Brake Issues It Can Address
- Worn front left rotor surface from normal brake use
- Brake pulsation caused by rotor wear or uneven surface condition
- Corrosion on the rotor hat or exposed braking surfaces
- Reduced braking consistency from an out-of-spec rotor
- Noise or vibration associated with a damaged front disc rotor
Installation Notes and Tips
Confirm the vehicle is a 2019-2024 Subaru Forester and verify the front left position before ordering or installing part number 633-13045L. Match the 316 mm front disc specification, 5-lug pattern, and directional rotor orientation to the existing brake setup. Inspect pads, caliper condition, and hub surface during service, and clean the mounting area before rotor installation to help ensure proper seating.
Quality Assurance
This rotor is built with a rust resistant coating and zinc black hat finish for added corrosion protection in brake service environments. The DFC Brake Rotor - Drilled and Slotted - Black product line emphasizes application-specific dimensions and finish details for direct-fit brake replacement on the listed Subaru Forester models.
