Original: $143.70
-65%$143.70
$50.29The Story
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-68008R, is a vented front right disc brake rotor built for select Brembo-equipped Nissan and INFINITI applications. It features a slotted X drilled surface, zinc black hat finish, and rust resistant coating for a clean, service-ready replacement.
Key Features
- Part number 633-68008R for direct identification
- Fits 2003-2008 Nissan 350Z, front right, with Brembo brakes
- Fits 2003-2004 INFINITI G35, front right, with Brembo brakes
- Vented rotor construction with 324 mm outside diameter
- Slotted X drilled braking surface for consistent pad contact
- Zinc black hat finish with rust resistant coating
- 5 lug bolt pattern with 114.3 mm bolt circle diameter
- Nominal thickness: 30 mm; discard thickness: 28.4 mm
Product Details
DFC Brake Rotor - Drilled and Slotted - Black, part number 633-68008R, is engineered as a directional front right rotor with a 68 mm center hole diameter, 49.1 mm overall height, and 12.7 mm stud/lug hole diameter. The plain disc finish and black hat coating provide a clean appearance while the rust resistant coating adds protection against corrosion. This rotor is specified for Brembo brake applications on the Nissan 350Z and INFINITI G35, making it a focused replacement for drivers searching for a front right drilled and slotted brake rotor for 2003-2008 Nissan 350Z or 2003-2004 INFINITI G35 Brembo brakes.
The DFC Brake Rotor - Drilled and Slotted - Black line is built around application-specific rotor sizing and surface design, giving buyers a straightforward option when replacing a worn front right rotor on these performance-oriented platforms. Part number 633-68008R should be matched to the vehicle position and brake package before ordering.
Common Reasons for Replacement
- Brake pulsation from rotor wear or thickness variation
- Visible scoring, grooves, or heat checking on the braking surface
- Corrosion on the rotor hat or braking surface
- Reduced braking consistency on the front right corner
- Rotor thickness approaching discard specification
Installation Notes
Confirm the vehicle year, make, model, front right position, and Brembo brake package before installation. Verify rotor dimensions, bolt pattern, and center hole diameter against the existing part to ensure proper fitment. Clean the hub mounting surface before installing the new rotor, and inspect pads and caliper hardware for wear at the same time.
Quality Assurance
This rotor is built with a rust resistant coating and zinc black hat finish for added surface protection. Part number 633-68008R is listed for specific Nissan 350Z and INFINITI G35 Brembo brake applications, supporting accurate replacement selection for the correct front right position.
Description
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-68008R, is a vented front right disc brake rotor built for select Brembo-equipped Nissan and INFINITI applications. It features a slotted X drilled surface, zinc black hat finish, and rust resistant coating for a clean, service-ready replacement.
Key Features
- Part number 633-68008R for direct identification
- Fits 2003-2008 Nissan 350Z, front right, with Brembo brakes
- Fits 2003-2004 INFINITI G35, front right, with Brembo brakes
- Vented rotor construction with 324 mm outside diameter
- Slotted X drilled braking surface for consistent pad contact
- Zinc black hat finish with rust resistant coating
- 5 lug bolt pattern with 114.3 mm bolt circle diameter
- Nominal thickness: 30 mm; discard thickness: 28.4 mm
Product Details
DFC Brake Rotor - Drilled and Slotted - Black, part number 633-68008R, is engineered as a directional front right rotor with a 68 mm center hole diameter, 49.1 mm overall height, and 12.7 mm stud/lug hole diameter. The plain disc finish and black hat coating provide a clean appearance while the rust resistant coating adds protection against corrosion. This rotor is specified for Brembo brake applications on the Nissan 350Z and INFINITI G35, making it a focused replacement for drivers searching for a front right drilled and slotted brake rotor for 2003-2008 Nissan 350Z or 2003-2004 INFINITI G35 Brembo brakes.
The DFC Brake Rotor - Drilled and Slotted - Black line is built around application-specific rotor sizing and surface design, giving buyers a straightforward option when replacing a worn front right rotor on these performance-oriented platforms. Part number 633-68008R should be matched to the vehicle position and brake package before ordering.
Common Reasons for Replacement
- Brake pulsation from rotor wear or thickness variation
- Visible scoring, grooves, or heat checking on the braking surface
- Corrosion on the rotor hat or braking surface
- Reduced braking consistency on the front right corner
- Rotor thickness approaching discard specification
Installation Notes
Confirm the vehicle year, make, model, front right position, and Brembo brake package before installation. Verify rotor dimensions, bolt pattern, and center hole diameter against the existing part to ensure proper fitment. Clean the hub mounting surface before installing the new rotor, and inspect pads and caliper hardware for wear at the same time.
Quality Assurance
This rotor is built with a rust resistant coating and zinc black hat finish for added surface protection. Part number 633-68008R is listed for specific Nissan 350Z and INFINITI G35 Brembo brake applications, supporting accurate replacement selection for the correct front right position.
