Original: $135.36
-65%$135.36
$47.38The Story
Rear Left Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-13044L, is a rear left disc brake rotor for the 2019-2025 Subaru Ascent. It combines a slotted X drilled surface with a directional brake face to support consistent braking performance in demanding driving conditions.
Built with a rust resistant coating and a Geospec Silver Grey hat finish, this rotor is made for buyers looking for a direct-fit rear brake rotor for Subaru Ascent rear left applications. The 830-13044L also uses a 5-lug pattern with a 114.3 mm bolt circle and a 331 mm outside diameter.
Key Features
- Part number 830-13044L
- Fits 2019-2025 Subaru Ascent, rear left
- Slotted X drilled surface type
- Directional brake surface for consistent rotor orientation
- Rust resistant coating for added corrosion protection
- Geospec Silver Grey hat finish
- 331 mm outside diameter
- 5 bolt holes and 5 stud/lug holes
- 58 mm center hole diameter
- Nominal thickness: 17 mm
- Discard thickness: 15 mm
Product Details
The DFC Geoperformance Rotor line focuses on performance-oriented brake service with rotor geometry that supports heat management and stable pedal feel. On this Subaru Ascent rear left rotor, the drilled and slotted face provides a functional upgrade path for drivers replacing a worn OE-style rotor while keeping the fitment specific to the vehicle platform. The 830-13044L is sized for the rear left position and matches the listed bolt circle, center bore, and height specifications for the application.
For shoppers searching for a 2019-2025 Subaru Ascent rear left brake rotor, a drilled and slotted rear rotor for Subaru Ascent, or Dynamite Friction 830-13044L, this part is built around the confirmed fitment and dimensional data provided.
Common Problems This Rotor Can Address
- Brake pulsation from a worn or uneven rear rotor
- Reduced braking consistency from heat-affected rotor surfaces
- Corrosion on the rotor hat or exposed metal surfaces
- Rotor replacement needs for rear left Subaru Ascent brake service
- Surface wear that exceeds discard thickness limits
Installation Notes
Verify rear left fitment before installation and confirm rotor dimensions against the vehicle’s brake specifications. Clean the hub mounting surface, inspect pads and caliper hardware for wear, and check rotor thickness after installation to confirm it remains above discard limits. Because this rotor uses a directional brake surface, install it in the correct orientation for the rear left position.
Quality Assurance
This rotor is built with a rust resistant coating and a Geospec Silver Grey hat finish to support long-term appearance and corrosion resistance in brake service. Part number 830-13044L is specified for the 2019-2025 Subaru Ascent rear left application.
Description
Rear Left Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-13044L, is a rear left disc brake rotor for the 2019-2025 Subaru Ascent. It combines a slotted X drilled surface with a directional brake face to support consistent braking performance in demanding driving conditions.
Built with a rust resistant coating and a Geospec Silver Grey hat finish, this rotor is made for buyers looking for a direct-fit rear brake rotor for Subaru Ascent rear left applications. The 830-13044L also uses a 5-lug pattern with a 114.3 mm bolt circle and a 331 mm outside diameter.
Key Features
- Part number 830-13044L
- Fits 2019-2025 Subaru Ascent, rear left
- Slotted X drilled surface type
- Directional brake surface for consistent rotor orientation
- Rust resistant coating for added corrosion protection
- Geospec Silver Grey hat finish
- 331 mm outside diameter
- 5 bolt holes and 5 stud/lug holes
- 58 mm center hole diameter
- Nominal thickness: 17 mm
- Discard thickness: 15 mm
Product Details
The DFC Geoperformance Rotor line focuses on performance-oriented brake service with rotor geometry that supports heat management and stable pedal feel. On this Subaru Ascent rear left rotor, the drilled and slotted face provides a functional upgrade path for drivers replacing a worn OE-style rotor while keeping the fitment specific to the vehicle platform. The 830-13044L is sized for the rear left position and matches the listed bolt circle, center bore, and height specifications for the application.
For shoppers searching for a 2019-2025 Subaru Ascent rear left brake rotor, a drilled and slotted rear rotor for Subaru Ascent, or Dynamite Friction 830-13044L, this part is built around the confirmed fitment and dimensional data provided.
Common Problems This Rotor Can Address
- Brake pulsation from a worn or uneven rear rotor
- Reduced braking consistency from heat-affected rotor surfaces
- Corrosion on the rotor hat or exposed metal surfaces
- Rotor replacement needs for rear left Subaru Ascent brake service
- Surface wear that exceeds discard thickness limits
Installation Notes
Verify rear left fitment before installation and confirm rotor dimensions against the vehicle’s brake specifications. Clean the hub mounting surface, inspect pads and caliper hardware for wear, and check rotor thickness after installation to confirm it remains above discard limits. Because this rotor uses a directional brake surface, install it in the correct orientation for the rear left position.
Quality Assurance
This rotor is built with a rust resistant coating and a Geospec Silver Grey hat finish to support long-term appearance and corrosion resistance in brake service. Part number 830-13044L is specified for the 2019-2025 Subaru Ascent rear left application.
