Original: $179.01
-65%$179.01
$62.65The Story
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-47039R, is a vented rear right disc brake rotor built for specific Chevrolet Camaro and Cadillac CTS applications. It features a slotted X drilled surface, a rust resistant coating, and a Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Key Features
- Part number 830-47039R for rear right brake rotor replacement
- 365 mm outside diameter with 28 mm nominal thickness and 26 mm discard thickness
- Vented rotor construction for rear brake applications
- Slotted X drilled directional braking surface
- Plain disc finish with Geospec Silver Grey hat finish
- Rust resistant coating for added surface protection
- 5-lug pattern with 120 mm bolt circle diameter
- 67.4 mm center hole diameter and 16.5 mm bolt hole diameter
Product Details
The DFC Geoperformance Rotor line focuses on drilled and slotted brake rotor construction for vehicles that use a performance-style rear disc setup. This rotor uses a directional braking surface and vented design to support consistent brake feel while maintaining the correct fitment dimensions for the listed Chevrolet Camaro and Cadillac CTS rear right positions. The 830-47039R is sized with a 365 mm outside diameter, 47.6 mm overall height, and 5-lug, 120 mm bolt circle geometry.
Compatible With 2022-2024 Chevrolet Camaro, rear right; 2010-2015 Chevrolet Camaro, rear right; 2017-2021 Chevrolet Camaro, rear right with aluminum hat disc; 2016-2019 Cadillac CTS, rear right with optional full cast front disc; and 2009-2015 Cadillac CTS, rear right with 2 piece front disc. This part number 830-47039R is a direct-fit rear right rotor for these listed applications.
Common Brake Issues This Rotor Can Address
- Rear brake rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency from a worn vented rear rotor
- Noise or vibration associated with damaged rear brake rotors
Installation Notes
Verify rear right position, rotor diameter, center hole diameter, and bolt pattern before installation. Confirm the vehicle’s brake package notes, especially Camaro aluminum hat disc and Cadillac CTS front disc configuration references, to ensure the correct application. Clean the hub mounting surface before installing the rotor and inspect pads, caliper hardware, and wheel bearings for wear at the same time.
Quality Assurance
This Dynamite Friction rotor is built with rust resistant coating and a corrosion-resistant hat finish to support long-term service appearance and fitment accuracy. The Geoperformance Rotor - Drilled and Slotted line is specified with application-based dimensions for the listed Camaro and CTS rear right brake setups, and part number 830-47039R should be matched to the exact vehicle configuration before purchase.
Description
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-47039R, is a vented rear right disc brake rotor built for specific Chevrolet Camaro and Cadillac CTS applications. It features a slotted X drilled surface, a rust resistant coating, and a Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Key Features
- Part number 830-47039R for rear right brake rotor replacement
- 365 mm outside diameter with 28 mm nominal thickness and 26 mm discard thickness
- Vented rotor construction for rear brake applications
- Slotted X drilled directional braking surface
- Plain disc finish with Geospec Silver Grey hat finish
- Rust resistant coating for added surface protection
- 5-lug pattern with 120 mm bolt circle diameter
- 67.4 mm center hole diameter and 16.5 mm bolt hole diameter
Product Details
The DFC Geoperformance Rotor line focuses on drilled and slotted brake rotor construction for vehicles that use a performance-style rear disc setup. This rotor uses a directional braking surface and vented design to support consistent brake feel while maintaining the correct fitment dimensions for the listed Chevrolet Camaro and Cadillac CTS rear right positions. The 830-47039R is sized with a 365 mm outside diameter, 47.6 mm overall height, and 5-lug, 120 mm bolt circle geometry.
Compatible With 2022-2024 Chevrolet Camaro, rear right; 2010-2015 Chevrolet Camaro, rear right; 2017-2021 Chevrolet Camaro, rear right with aluminum hat disc; 2016-2019 Cadillac CTS, rear right with optional full cast front disc; and 2009-2015 Cadillac CTS, rear right with 2 piece front disc. This part number 830-47039R is a direct-fit rear right rotor for these listed applications.
Common Brake Issues This Rotor Can Address
- Rear brake rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency from a worn vented rear rotor
- Noise or vibration associated with damaged rear brake rotors
Installation Notes
Verify rear right position, rotor diameter, center hole diameter, and bolt pattern before installation. Confirm the vehicle’s brake package notes, especially Camaro aluminum hat disc and Cadillac CTS front disc configuration references, to ensure the correct application. Clean the hub mounting surface before installing the rotor and inspect pads, caliper hardware, and wheel bearings for wear at the same time.
Quality Assurance
This Dynamite Friction rotor is built with rust resistant coating and a corrosion-resistant hat finish to support long-term service appearance and fitment accuracy. The Geoperformance Rotor - Drilled and Slotted line is specified with application-based dimensions for the listed Camaro and CTS rear right brake setups, and part number 830-47039R should be matched to the exact vehicle configuration before purchase.
