Original: $24.25
-65%$24.25
$8.49The Story
Mevotech DX268 CV Joint Boot for Front Axles
The Mevotech DX268 is a front CV joint boot built with neoprene material and a conical profile for service on select front inner and front side inner CV joints. It includes grease and two adjustable clamps to support a complete boot service on covered applications. This part is a direct-fit driveline service component for vehicles such as Jeep Renegade, Jeep Compass, Jeep Patriot, Honda Accord, Dodge Dart, Chevrolet Captiva Sport, and Dodge Caliber.
Key Features
- Neoprene CV joint boot construction
- Conical boot design for front driveline service
- Includes grease
- Includes 2 clamps
- Adjustable clamps for secure fitment
- Front application for inner CV joint positions
- Cross-reference: 86-2468
Detailed Description
Mevotech DX268 is a CV joint boot for front inner and front left or front right inner positions, depending on vehicle application. It is listed for 2015-2018 Jeep Renegade front inner, 2007-2017 Jeep Compass front inner, 2016-2017 Jeep Compass front left inner, 2007-2017 Jeep Patriot front inner, 2015-2017 Honda Accord front inner, 2013-2016 Dodge Dart front left inner, 2012-2015 Chevrolet Captiva Sport front right inner, and 2007-2012 Dodge Caliber front inner. The neoprene boot material and conical shape are specified for driveline sealing service where the original boot has worn, split, or lost grease retention. Part number DX268 is also referenced as 86-2468 for the same application.
What It Helps Address
- Split or cracked CV boot material
- Grease leakage from the inner CV joint area
- Contamination entering the CV joint assembly
- Noise caused by boot failure and lubricant loss
- Service replacement on front inner CV joint positions
Installation Notes and Tips
Verify the vehicle’s year, make, model, and exact front inner position before installation. Clean the CV joint area thoroughly, inspect the joint for damage, and confirm clamp placement before tightening. Use the included grease and the two supplied clamps during assembly, and check that the boot seats evenly on both ends to maintain a proper seal. For fitment-specific service, confirm whether the application calls for front inner, front left inner, or front right inner placement.
Quality Assurance
Mevotech supplies driveline hardware and service parts for covered applications, and DX268 is built to match the listed fitments with the specified neoprene boot, grease, and clamp configuration.
Description
Mevotech DX268 CV Joint Boot for Front Axles
The Mevotech DX268 is a front CV joint boot built with neoprene material and a conical profile for service on select front inner and front side inner CV joints. It includes grease and two adjustable clamps to support a complete boot service on covered applications. This part is a direct-fit driveline service component for vehicles such as Jeep Renegade, Jeep Compass, Jeep Patriot, Honda Accord, Dodge Dart, Chevrolet Captiva Sport, and Dodge Caliber.
Key Features
- Neoprene CV joint boot construction
- Conical boot design for front driveline service
- Includes grease
- Includes 2 clamps
- Adjustable clamps for secure fitment
- Front application for inner CV joint positions
- Cross-reference: 86-2468
Detailed Description
Mevotech DX268 is a CV joint boot for front inner and front left or front right inner positions, depending on vehicle application. It is listed for 2015-2018 Jeep Renegade front inner, 2007-2017 Jeep Compass front inner, 2016-2017 Jeep Compass front left inner, 2007-2017 Jeep Patriot front inner, 2015-2017 Honda Accord front inner, 2013-2016 Dodge Dart front left inner, 2012-2015 Chevrolet Captiva Sport front right inner, and 2007-2012 Dodge Caliber front inner. The neoprene boot material and conical shape are specified for driveline sealing service where the original boot has worn, split, or lost grease retention. Part number DX268 is also referenced as 86-2468 for the same application.
What It Helps Address
- Split or cracked CV boot material
- Grease leakage from the inner CV joint area
- Contamination entering the CV joint assembly
- Noise caused by boot failure and lubricant loss
- Service replacement on front inner CV joint positions
Installation Notes and Tips
Verify the vehicle’s year, make, model, and exact front inner position before installation. Clean the CV joint area thoroughly, inspect the joint for damage, and confirm clamp placement before tightening. Use the included grease and the two supplied clamps during assembly, and check that the boot seats evenly on both ends to maintain a proper seal. For fitment-specific service, confirm whether the application calls for front inner, front left inner, or front right inner placement.
Quality Assurance
Mevotech supplies driveline hardware and service parts for covered applications, and DX268 is built to match the listed fitments with the specified neoprene boot, grease, and clamp configuration.
