The Story
Front Wheel Bearing Hub Assembly for BMW
Mevotech MB10301 is a front wheel bearing and hub assembly engineered for BMW passenger vehicles, including 3 Series, 4 Series, and 2 Series applications. Built as a Gen 3 roll-form design and pre-greased for service, it is made for high-usage driving where consistent hub support and smooth wheel rotation matter.
- Part number: MB10301
- Front wheel bearing and hub assembly
- Gen 3 roll-form design
- Pre-greased for installation
- ABS sensor: non-integral
- Inside diameter: 78.95 mm
- Outside diameter: 147 mm
- Flange bolt hole quantity: 4
- Number of bolt holes: 5
Built for BMW Front-End Service
Mevotech Supreme hub bearing assemblies are engineered in-house with application-specific upgrades for durability and performance. MB10301 is designed for front axle service on BMW models such as the 2012-2016 BMW 328i, 2015-2018 BMW 320i, and 2017-2021 BMW 230i. This part cross-references SKF BR930885 and Timken HA590539 for the same application.
Common Issues This Part Can Address
- Wheel bearing noise from the front hub area
- Excessive wheel play or looseness
- Rough rotation or vibration at the front wheel
- ABS warning concerns related to hub service on non-integral sensor applications
- Wear from repeated commercial, fleet, or daily-driver use
Installation Notes and Tips
Verify front position and confirm the vehicle’s exact BMW model, year, and build date before ordering. This assembly is listed with a non-integral ABS sensor, so transfer and sensor-related checks should be completed during diagnosis and installation. Confirm flange and bolt-hole configuration against the original hub before pressing or bolting the part into service.
Quality Assurance
Mevotech Supreme parts are built with application-specific engineering for demanding passenger and working-vehicle use. MB10301 is a direct-fit front hub bearing assembly for confirmed BMW applications, including 2012-2016 BMW 328i, 2015-2018 BMW 320i, and 2017-2021 BMW 230i.
- Fits 2017-2021 BMW 230i, front
- Fits 2017-2021 BMW M240i, front
- Fits 2017-2020 BMW 430i, front
- Fits 2017-2020 BMW 430i Gran Coupe, front
- Fits 2017-2020 BMW 440i, front
- Fits 2017-2020 BMW 440i Gran Coupe, front
- Fits 2015-2018 BMW 320i, front
- Fits 2013 BMW 320i, front
- Fits 2015-2018 BMW 328d, front
- Fits 2016-2018 BMW 330e, front
- Fits 2017-2018 BMW 330i, front
- Fits 2016-2018 BMW 340i, front
- Fits 2014-2016 BMW 228i, front
- Fits 2012-2016 BMW 328i, front
- Fits 2015-2016 BMW 428i, front
- Fits 2015-2016 BMW 428i Gran Coupe, front
- Fits 2015-2016 BMW 435i, front
- Fits 2015-2016 BMW 435i Gran Coupe, front
- Fits 2014-2016 BMW M235i, front
- Fits 2015 BMW 328i GT xDrive, front
- Fits 2012-2015 BMW 335i, front
- Fits 2013-2015 BMW ActiveHybrid 3, front
- Fits 2014 BMW 320i, front, from 10/2013
- Fits 2014 BMW 328d, front, from 10/2013
- Fits 2014 BMW 428i, front, from 10/2013
- Fits 2014 BMW 435i, front, from 10/2013
Description
Front Wheel Bearing Hub Assembly for BMW
Mevotech MB10301 is a front wheel bearing and hub assembly engineered for BMW passenger vehicles, including 3 Series, 4 Series, and 2 Series applications. Built as a Gen 3 roll-form design and pre-greased for service, it is made for high-usage driving where consistent hub support and smooth wheel rotation matter.
- Part number: MB10301
- Front wheel bearing and hub assembly
- Gen 3 roll-form design
- Pre-greased for installation
- ABS sensor: non-integral
- Inside diameter: 78.95 mm
- Outside diameter: 147 mm
- Flange bolt hole quantity: 4
- Number of bolt holes: 5
Built for BMW Front-End Service
Mevotech Supreme hub bearing assemblies are engineered in-house with application-specific upgrades for durability and performance. MB10301 is designed for front axle service on BMW models such as the 2012-2016 BMW 328i, 2015-2018 BMW 320i, and 2017-2021 BMW 230i. This part cross-references SKF BR930885 and Timken HA590539 for the same application.
Common Issues This Part Can Address
- Wheel bearing noise from the front hub area
- Excessive wheel play or looseness
- Rough rotation or vibration at the front wheel
- ABS warning concerns related to hub service on non-integral sensor applications
- Wear from repeated commercial, fleet, or daily-driver use
Installation Notes and Tips
Verify front position and confirm the vehicle’s exact BMW model, year, and build date before ordering. This assembly is listed with a non-integral ABS sensor, so transfer and sensor-related checks should be completed during diagnosis and installation. Confirm flange and bolt-hole configuration against the original hub before pressing or bolting the part into service.
Quality Assurance
Mevotech Supreme parts are built with application-specific engineering for demanding passenger and working-vehicle use. MB10301 is a direct-fit front hub bearing assembly for confirmed BMW applications, including 2012-2016 BMW 328i, 2015-2018 BMW 320i, and 2017-2021 BMW 230i.
- Fits 2017-2021 BMW 230i, front
- Fits 2017-2021 BMW M240i, front
- Fits 2017-2020 BMW 430i, front
- Fits 2017-2020 BMW 430i Gran Coupe, front
- Fits 2017-2020 BMW 440i, front
- Fits 2017-2020 BMW 440i Gran Coupe, front
- Fits 2015-2018 BMW 320i, front
- Fits 2013 BMW 320i, front
- Fits 2015-2018 BMW 328d, front
- Fits 2016-2018 BMW 330e, front
- Fits 2017-2018 BMW 330i, front
- Fits 2016-2018 BMW 340i, front
- Fits 2014-2016 BMW 228i, front
- Fits 2012-2016 BMW 328i, front
- Fits 2015-2016 BMW 428i, front
- Fits 2015-2016 BMW 428i Gran Coupe, front
- Fits 2015-2016 BMW 435i, front
- Fits 2015-2016 BMW 435i Gran Coupe, front
- Fits 2014-2016 BMW M235i, front
- Fits 2015 BMW 328i GT xDrive, front
- Fits 2012-2015 BMW 335i, front
- Fits 2013-2015 BMW ActiveHybrid 3, front
- Fits 2014 BMW 320i, front, from 10/2013
- Fits 2014 BMW 328d, front, from 10/2013
- Fits 2014 BMW 428i, front, from 10/2013
- Fits 2014 BMW 435i, front, from 10/2013
