Original: $208.33
-65%$208.33
$72.92The Story
Mevotech MB70306 Wheel Bearing Hub Assembly
The Mevotech MB70306 is a pre-greased wheel bearing and hub assembly for select Audi and Volkswagen applications. It is built as a Gen 3 hub assembly with a 5-stud wheel pattern, 3 flange bolt holes, and mounting hardware included for a direct replacement service.
Key Features
- Part number: MB70306
- Wheel bearing and hub assembly for driveline and axle service
- Gen 3 bearing generation
- Pre-greased for installation readiness
- 5 wheel studs and 3 flange bolt holes
- Inside diameter: 30.3
- Outside diameter: 136.4
- Mounting hardware included
- ABS sensor not included
Fitment Details
- Fits 2015-2020 Audi A3, front, with 80mm bearing outside diameter.
- Fits 2015-2020 Audi A3 Quattro, front, with 80mm bearing outside diameter.
- Fits 2017-2020 Audi RS3, rear, with 80mm bearing outside diameter.
- Fits 2015-2020 Audi S3, rear, with 80mm bearing outside diameter.
- Fits 2017-2019 Volkswagen Golf Alltrack, rear, with 80mm bearing outside diameter.
- Fits 2019 Volkswagen Golf R, rear, disc brakes, front (Geomet D) [1Zf].
- Fits 2017-2019 Volkswagen Golf SportWagen, rear, with 80mm bearing outside diameter.
- Fits 2017-2018 Audi A3 Sportback e-tron, front, with 80mm bearing outside diameter.
- Fits 2018 Volkswagen Golf R, front, with 80mm bearing outside diameter.
- Fits 2015-2017 Volkswagen Golf R, rear, with 80mm bearing outside diameter.
- Fits 2016 Audi A3 Sportback e-tron, front, 80 mm disc brake rotor.
- Fits 2015-2016 Volkswagen GTI, front, with 80mm bearing outside diameter.
What This Part Helps Address
- Wheel bearing noise from a worn hub assembly
- Hub play or looseness at the wheel end
- Uneven wheel rotation caused by bearing wear
- Service issues on Audi A3, Audi S3, and Volkswagen Golf platform vehicles
- Replacement needs for a 5-stud hub assembly with the correct flange pattern
Installation Notes
Confirm the vehicle’s bearing outside diameter and brake configuration before ordering, since fitment varies by model and position. This MB70306 assembly is listed for front and rear applications depending on the vehicle, and the ABS sensor is not included. Always verify the OE-style interchange and match the hub dimensions to the original part before installation.
Quality Assurance
Mevotech MB70306 is a Gen 3 wheel bearing and hub assembly supplied pre-greased and ready for service. This part cross-references Timken HA590617 and MOOG 512566 for the same application.
Description
Mevotech MB70306 Wheel Bearing Hub Assembly
The Mevotech MB70306 is a pre-greased wheel bearing and hub assembly for select Audi and Volkswagen applications. It is built as a Gen 3 hub assembly with a 5-stud wheel pattern, 3 flange bolt holes, and mounting hardware included for a direct replacement service.
Key Features
- Part number: MB70306
- Wheel bearing and hub assembly for driveline and axle service
- Gen 3 bearing generation
- Pre-greased for installation readiness
- 5 wheel studs and 3 flange bolt holes
- Inside diameter: 30.3
- Outside diameter: 136.4
- Mounting hardware included
- ABS sensor not included
Fitment Details
- Fits 2015-2020 Audi A3, front, with 80mm bearing outside diameter.
- Fits 2015-2020 Audi A3 Quattro, front, with 80mm bearing outside diameter.
- Fits 2017-2020 Audi RS3, rear, with 80mm bearing outside diameter.
- Fits 2015-2020 Audi S3, rear, with 80mm bearing outside diameter.
- Fits 2017-2019 Volkswagen Golf Alltrack, rear, with 80mm bearing outside diameter.
- Fits 2019 Volkswagen Golf R, rear, disc brakes, front (Geomet D) [1Zf].
- Fits 2017-2019 Volkswagen Golf SportWagen, rear, with 80mm bearing outside diameter.
- Fits 2017-2018 Audi A3 Sportback e-tron, front, with 80mm bearing outside diameter.
- Fits 2018 Volkswagen Golf R, front, with 80mm bearing outside diameter.
- Fits 2015-2017 Volkswagen Golf R, rear, with 80mm bearing outside diameter.
- Fits 2016 Audi A3 Sportback e-tron, front, 80 mm disc brake rotor.
- Fits 2015-2016 Volkswagen GTI, front, with 80mm bearing outside diameter.
What This Part Helps Address
- Wheel bearing noise from a worn hub assembly
- Hub play or looseness at the wheel end
- Uneven wheel rotation caused by bearing wear
- Service issues on Audi A3, Audi S3, and Volkswagen Golf platform vehicles
- Replacement needs for a 5-stud hub assembly with the correct flange pattern
Installation Notes
Confirm the vehicle’s bearing outside diameter and brake configuration before ordering, since fitment varies by model and position. This MB70306 assembly is listed for front and rear applications depending on the vehicle, and the ABS sensor is not included. Always verify the OE-style interchange and match the hub dimensions to the original part before installation.
Quality Assurance
Mevotech MB70306 is a Gen 3 wheel bearing and hub assembly supplied pre-greased and ready for service. This part cross-references Timken HA590617 and MOOG 512566 for the same application.
