Original: $139.54
-65%$139.54
$48.84The Story
Wheel Bearing and Hub Assembly for Hyundai and Kia
Mevotech MB90314 is a pre-greased wheel bearing and hub assembly for front and rear applications on select Hyundai and Kia vehicles. It is built with a Gen 3 bearing design, 5 wheel studs, and a 3-bolt flange pattern for direct replacement service.
Compatible With 2017-2025 Hyundai Elantra front, 2018-2025 Hyundai Kona rear, 2017-2025 Kia Niro front, 2019-2024 Kia Forte front, 2020-2024 Kia Forte5 front, 2021-2024 Kia Seltos rear, 2017-2022 Hyundai Ioniq front, and 2018-2020 Hyundai Elantra GT front. This part cross-references Timken (e.g., HA590707) for the same application.
Key Features
- Mevotech MB90314 wheel bearing and hub assembly
- Gen 3 bearing generation for modern hub service applications
- Pre-greased for ready-to-install service
- 5 wheel studs for wheel mounting
- 3 flange bolt holes for hub attachment
- Outside diameter: 139.0 mm
- Inside diameter: 28.8 mm
- Anti-lock brake sensor not included
Detailed Description
MB90314 is a direct-fit hub assembly for select Hyundai Elantra, Kona, Ioniq, Elantra GT, and Kia Niro, Forte, Forte5, and Seltos applications. The pre-greased design helps reduce prep time during service, while the Gen 3 bearing construction supports a complete hub replacement in one assembly. With 5 studs and a 3-bolt flange, this unit matches the mounting requirements for the listed front and rear positions.
Use Mevotech MB90314 when replacing a worn or noisy hub on a 2017-2025 Hyundai Elantra front, 2019-2024 Kia Forte front, or 2021-2024 Kia Seltos rear. The assembly is also listed under Mevotech Original Grade G90314, MOOG 513420, SKF BR930989, and Timken HA590707 interchange references.
What This Part Helps Address
- Wheel bearing noise or growling from the hub area
- Excessive wheel play or looseness
- Uneven hub rotation or rough bearing feel
- Hub replacement after wear on front or rear axle positions
- Service replacement for vehicles with 5-stud hub mounting
Installation Notes and Tips
Confirm the vehicle position before ordering, since MB90314 is listed for both front and rear applications depending on model. Verify the 3-bolt flange pattern, 5-stud configuration, and 28.8 mm inside diameter against the original part before installation. The ABS sensor is not included, so reuse or source the sensor separately if your vehicle requires one.
Quality Assurance
Mevotech supplies this hub assembly under its Supreme line for OE-style replacement service. The part is pre-greased and built as a complete bearing and hub unit for consistent fitment on the listed Hyundai and Kia applications.
Description
Wheel Bearing and Hub Assembly for Hyundai and Kia
Mevotech MB90314 is a pre-greased wheel bearing and hub assembly for front and rear applications on select Hyundai and Kia vehicles. It is built with a Gen 3 bearing design, 5 wheel studs, and a 3-bolt flange pattern for direct replacement service.
Compatible With 2017-2025 Hyundai Elantra front, 2018-2025 Hyundai Kona rear, 2017-2025 Kia Niro front, 2019-2024 Kia Forte front, 2020-2024 Kia Forte5 front, 2021-2024 Kia Seltos rear, 2017-2022 Hyundai Ioniq front, and 2018-2020 Hyundai Elantra GT front. This part cross-references Timken (e.g., HA590707) for the same application.
Key Features
- Mevotech MB90314 wheel bearing and hub assembly
- Gen 3 bearing generation for modern hub service applications
- Pre-greased for ready-to-install service
- 5 wheel studs for wheel mounting
- 3 flange bolt holes for hub attachment
- Outside diameter: 139.0 mm
- Inside diameter: 28.8 mm
- Anti-lock brake sensor not included
Detailed Description
MB90314 is a direct-fit hub assembly for select Hyundai Elantra, Kona, Ioniq, Elantra GT, and Kia Niro, Forte, Forte5, and Seltos applications. The pre-greased design helps reduce prep time during service, while the Gen 3 bearing construction supports a complete hub replacement in one assembly. With 5 studs and a 3-bolt flange, this unit matches the mounting requirements for the listed front and rear positions.
Use Mevotech MB90314 when replacing a worn or noisy hub on a 2017-2025 Hyundai Elantra front, 2019-2024 Kia Forte front, or 2021-2024 Kia Seltos rear. The assembly is also listed under Mevotech Original Grade G90314, MOOG 513420, SKF BR930989, and Timken HA590707 interchange references.
What This Part Helps Address
- Wheel bearing noise or growling from the hub area
- Excessive wheel play or looseness
- Uneven hub rotation or rough bearing feel
- Hub replacement after wear on front or rear axle positions
- Service replacement for vehicles with 5-stud hub mounting
Installation Notes and Tips
Confirm the vehicle position before ordering, since MB90314 is listed for both front and rear applications depending on model. Verify the 3-bolt flange pattern, 5-stud configuration, and 28.8 mm inside diameter against the original part before installation. The ABS sensor is not included, so reuse or source the sensor separately if your vehicle requires one.
Quality Assurance
Mevotech supplies this hub assembly under its Supreme line for OE-style replacement service. The part is pre-greased and built as a complete bearing and hub unit for consistent fitment on the listed Hyundai and Kia applications.
