The Story
Mevotech MS40905 Steering Pitman Arm
Mevotech MS40905 is a front steering pitman arm for select Ford Super Duty trucks and the Ford Excursion. It is built with a 32-spline connection and a 6.54-inch length to match the steering linkage requirements on listed applications.
Key Features
- Part number: MS40905
- Steering pitman arm for front suspension/steering applications
- 32 spline quantity for the steering gear connection
- 6.54-inch length
- Fits select 1999-2004 Ford F-250 Super Duty, Ford F-350 Super Duty, and 2001-2004 Ford Excursion applications
- Cross-references MOOG Chassis Products K80796 for the same application
Detailed Description
Use Mevotech MS40905 when replacing a worn steering pitman arm on compatible Ford heavy-duty trucks and SUV applications. This component connects the steering gear to the steering linkage and is specified for front-position fitment on 1999-2004 Ford F-250 Super Duty, 1999-2004 Ford F-350 Super Duty, and 2001-2004 Ford Excursion models with the listed monobeam and ball joint configuration notes. The MS40905 part number is also referenced by several aftermarket listings for the same steering application.
This part cross-references MOOG Chassis Products K80796 for the same application.
Vehicle Fitment
- Fits 2001-2004 Ford Excursion, front — 36 splines; monobeam with ball joint.
- Fits 2000-2004 Ford F-250 Super Duty, front — 36 splines; monobeam with ball joint.
- Fits 2000-2004 Ford F-350 Super Duty, front — 36 splines; monobeam with ball joint.
- Fits 1999 Ford F-250 Super Duty, front — 36 splines; from 3/1999; monobeam with ball joint.
- Fits 1999 Ford F-350 Super Duty, front — 36 splines; from 3/1999; monobeam with ball joint.
What It Helps Address
- Excess steering play caused by a worn pitman arm
- Loose or imprecise steering response at the wheel
- Steering linkage movement from spline or arm wear
- Front-end steering correction after suspension service
- Replacement of a damaged steering gear output connection
Installation Notes and Tips
Verify spline count, arm length, and vehicle configuration before installation. Confirm front-position fitment and match the listed monobeam with ball joint notes for your Ford F-250 Super Duty, Ford F-350 Super Duty, or Ford Excursion application. Inspect related steering linkage components during replacement to ensure the repair addresses the full steering system wear pattern.
Quality Assurance
Mevotech supplies steering and chassis components for service replacement applications. MS40905 is cataloged with defined spline and length specifications to support accurate part matching for the listed Ford applications.
Description
Mevotech MS40905 Steering Pitman Arm
Mevotech MS40905 is a front steering pitman arm for select Ford Super Duty trucks and the Ford Excursion. It is built with a 32-spline connection and a 6.54-inch length to match the steering linkage requirements on listed applications.
Key Features
- Part number: MS40905
- Steering pitman arm for front suspension/steering applications
- 32 spline quantity for the steering gear connection
- 6.54-inch length
- Fits select 1999-2004 Ford F-250 Super Duty, Ford F-350 Super Duty, and 2001-2004 Ford Excursion applications
- Cross-references MOOG Chassis Products K80796 for the same application
Detailed Description
Use Mevotech MS40905 when replacing a worn steering pitman arm on compatible Ford heavy-duty trucks and SUV applications. This component connects the steering gear to the steering linkage and is specified for front-position fitment on 1999-2004 Ford F-250 Super Duty, 1999-2004 Ford F-350 Super Duty, and 2001-2004 Ford Excursion models with the listed monobeam and ball joint configuration notes. The MS40905 part number is also referenced by several aftermarket listings for the same steering application.
This part cross-references MOOG Chassis Products K80796 for the same application.
Vehicle Fitment
- Fits 2001-2004 Ford Excursion, front — 36 splines; monobeam with ball joint.
- Fits 2000-2004 Ford F-250 Super Duty, front — 36 splines; monobeam with ball joint.
- Fits 2000-2004 Ford F-350 Super Duty, front — 36 splines; monobeam with ball joint.
- Fits 1999 Ford F-250 Super Duty, front — 36 splines; from 3/1999; monobeam with ball joint.
- Fits 1999 Ford F-350 Super Duty, front — 36 splines; from 3/1999; monobeam with ball joint.
What It Helps Address
- Excess steering play caused by a worn pitman arm
- Loose or imprecise steering response at the wheel
- Steering linkage movement from spline or arm wear
- Front-end steering correction after suspension service
- Replacement of a damaged steering gear output connection
Installation Notes and Tips
Verify spline count, arm length, and vehicle configuration before installation. Confirm front-position fitment and match the listed monobeam with ball joint notes for your Ford F-250 Super Duty, Ford F-350 Super Duty, or Ford Excursion application. Inspect related steering linkage components during replacement to ensure the repair addresses the full steering system wear pattern.
Quality Assurance
Mevotech supplies steering and chassis components for service replacement applications. MS40905 is cataloged with defined spline and length specifications to support accurate part matching for the listed Ford applications.
