Mevotech MS80003 Alignment Shim - Front

Alignment Shim for Front Camber and Caster Adjustment

Mevotech MS80003 is a front alignment shim for camber and caster correction on select Dodge and Ford compact trucks. This duo-fit shim is specified at 0.40 mm (1/64 in) thickness and is sized for OE bolt diameters from 11 mm to 13 mm (7/16 in to 1/2 in).

Use MS80003 when servicing front suspension alignment on vehicles that require precise shim selection for camber and caster settings. This part cross-references Monroe Shocks & Struts (e.g., K100318) for the same application.

Key Features

• Front alignment shim for camber and caster adjustment
• Mevotech part number MS80003
• 0.40 mm / 1/64 in thickness
• Duo-fit design for OE bolt sizes from 11 mm to 13 mm
• Packaged 25 per box
• Direct fitment for select Dodge Ram 50, Dodge Raider, Dodge D50, and Ford Courier applications

Vehicle Fitment

• Fits 1983-1993 Dodge Ram 50, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 0.40mm or 1/64in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1987-1989 Dodge Raider, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 0.40mm or 1/64in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1982 Dodge D50, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 0.40mm or 1/64in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter
• Fits 1975-1982 Ford Courier, front. Camber / Caster Duo-Fit Shims - Qty. 25 per pkg.; 0.40mm or 1/64in Thickness; OE Bolt Size Of 11mm To 13mm / 7/16in To 1/2in Diameter

What This Shim Helps Correct

• Front wheel alignment that needs camber or caster adjustment
• Uneven tire wear caused by incorrect alignment angles
• Steering pull related to front suspension geometry
• Alignment correction after suspension service or component replacement
• Fine-tuning on Dodge Ram 50, Dodge Raider, Dodge D50, and Ford Courier front ends

Installation Notes

Confirm OE bolt diameter before installation and match the shim thickness to the alignment correction required. These shims are used during front suspension alignment service, so final settings should be verified with proper alignment equipment after installation.

Quality Assurance

Mevotech MS80003 is built for specified front suspension applications and follows the listed OE bolt-size and thickness requirements for accurate fitment on select Dodge and Ford vehicles.