Original: $30.15
-65%$30.15
$10.55The Story
Alignment Shim for Front Camber and Caster Adjustment
Mevotech MS80006 is a front alignment shim for vehicles that use camber/caster duo-fit shim hardware. It is built for precise suspension alignment service on select Dodge and Ford compact trucks, including Dodge Ram 50, Dodge Raider, Dodge D50, and Ford Courier applications.
- Front alignment shim for camber and caster correction
- 3.18 mm (1/8 in.) thickness
- Qty. 25 per package
- OE bolt size range: 11 mm to 13 mm / 7/16 in. to 1/2 in. diameter
- Mevotech part number MS80006
Fitment Details
- Fits 1983-1993 Dodge Ram 50, front; Camber / Caster Duo-Fit Shims
- Fits 1987-1989 Dodge Raider, front; Camber / Caster Duo-Fit Shims
- Fits 1979-1982 Dodge D50, front; Camber / Caster Duo-Fit Shims
- Fits 1975-1982 Ford Courier, front; Camber / Caster Duo-Fit Shims
This alignment shim is used during front-end alignment service to fine-tune suspension geometry after component replacement, collision repair, or when factory alignment settings need correction. For Dodge Ram 50 front alignment shim service, Dodge D50 front suspension adjustment, or Ford Courier camber and caster correction, MS80006 provides a measured shim thickness for repeatable setup. This part cross-references 19344908 for the same application.
Common Uses
- Correcting front camber angle after suspension service
- Adjusting front caster settings during alignment
- Addressing uneven tire wear caused by misalignment
- Restoring steering pull caused by front-end geometry issues
- Setting alignment after control arm or suspension work
Installation Notes
Verify OE bolt diameter before installation; this shim is specified for 11 mm to 13 mm / 7/16 in. to 1/2 in. diameter bolts. Use alignment equipment and follow the vehicle’s service specifications when selecting shim thickness and placement. MS80006 is a front-position part and should be matched to the correct camber/caster duo-fit application.
Quality Assurance
Mevotech MS80006 is cataloged as a Mevotech Supreme interchange and is identified for the listed front applications. Confirm part number MS80006 against the vehicle’s alignment requirements before service.
Description
Alignment Shim for Front Camber and Caster Adjustment
Mevotech MS80006 is a front alignment shim for vehicles that use camber/caster duo-fit shim hardware. It is built for precise suspension alignment service on select Dodge and Ford compact trucks, including Dodge Ram 50, Dodge Raider, Dodge D50, and Ford Courier applications.
- Front alignment shim for camber and caster correction
- 3.18 mm (1/8 in.) thickness
- Qty. 25 per package
- OE bolt size range: 11 mm to 13 mm / 7/16 in. to 1/2 in. diameter
- Mevotech part number MS80006
Fitment Details
- Fits 1983-1993 Dodge Ram 50, front; Camber / Caster Duo-Fit Shims
- Fits 1987-1989 Dodge Raider, front; Camber / Caster Duo-Fit Shims
- Fits 1979-1982 Dodge D50, front; Camber / Caster Duo-Fit Shims
- Fits 1975-1982 Ford Courier, front; Camber / Caster Duo-Fit Shims
This alignment shim is used during front-end alignment service to fine-tune suspension geometry after component replacement, collision repair, or when factory alignment settings need correction. For Dodge Ram 50 front alignment shim service, Dodge D50 front suspension adjustment, or Ford Courier camber and caster correction, MS80006 provides a measured shim thickness for repeatable setup. This part cross-references 19344908 for the same application.
Common Uses
- Correcting front camber angle after suspension service
- Adjusting front caster settings during alignment
- Addressing uneven tire wear caused by misalignment
- Restoring steering pull caused by front-end geometry issues
- Setting alignment after control arm or suspension work
Installation Notes
Verify OE bolt diameter before installation; this shim is specified for 11 mm to 13 mm / 7/16 in. to 1/2 in. diameter bolts. Use alignment equipment and follow the vehicle’s service specifications when selecting shim thickness and placement. MS80006 is a front-position part and should be matched to the correct camber/caster duo-fit application.
Quality Assurance
Mevotech MS80006 is cataloged as a Mevotech Supreme interchange and is identified for the listed front applications. Confirm part number MS80006 against the vehicle’s alignment requirements before service.
