The Story
Mevotech TTX Tie Rod End TXMS30605
Mevotech TXMS30605 is a front left outer steering tie rod end built for heavy-duty use on select Nissan and INFINITI applications. It is engineered with a pre-greased, greaseable design and sintered metal bearing material for consistent steering response in demanding driving conditions.
Fits 2004-2015 Nissan TITAN, front left outer; Fits 2005-2015 Nissan Armada, front left outer; Fits 2017-2024 Nissan Armada, front left outer; Fits 2004-2013 INFINITI QX56, front left outer; Fits 2014-2024 INFINITI QX80, front left outer; Fits 2004 Nissan Pathfinder Armada, front left outer.
Key Features
- Part number TXMS30605 for direct identification and ordering
- Front left outer steering tie rod end
- Pre-greased and greaseable for serviceable maintenance
- Sintered metal bearing material for durable steering support
- Neoprene dust boot with green boot color for seal protection
- Castle nut, cotter pin, grease fitting, dust boot, and mounting hardware included
- Threaded stud design with M14-1.5 end 1 thread size
- Non-adjustable construction
Product Details
Mevotech TTX parts are built for high-use passenger vehicles, SUVs, fleets, and working trucks, and this TXMS30605 tie rod end follows that approach with a focus on durability and serviceability. The design uses a threaded stud, male-to-female end configuration, and a sintered metal bearing to support steering linkage performance under repeated load. The neoprene boot helps protect the joint from contamination, while the greaseable setup allows routine lubrication service.
This part cross-references MOOG Chassis Products ES800031 and Delphi TA3056 for the same application. For buyers searching for a Nissan Armada front left outer tie rod end or an INFINITI QX80 steering tie rod end, TXMS30605 provides a direct-fit option for the listed vehicles.
Common Problems This Part Can Address
- Loose or imprecise steering feel at the front left outer linkage
- Clunking or play caused by wear in the tie rod end joint
- Boot damage that exposes the joint to dirt and moisture
- Grease loss that can accelerate steering component wear
- Need for a replacement tie rod end on Nissan TITAN, Armada, QX56, QX80, or Pathfinder Armada applications
Installation Notes
Verify vehicle year, make, model, and front left outer position before installation. Inspect the steering linkage, alignment angles, and adjacent components for wear before replacing the part. Because this tie rod end is non-adjustable, final alignment should be checked after installation to confirm proper steering geometry.
Quality Assurance
Mevotech TTX steering components are engineered for demanding service conditions and built with labor-saving design elements to simplify installation. TXMS30605 is supplied with the listed service hardware and protective boot components for a complete replacement at the specified position.
Description
Mevotech TTX Tie Rod End TXMS30605
Mevotech TXMS30605 is a front left outer steering tie rod end built for heavy-duty use on select Nissan and INFINITI applications. It is engineered with a pre-greased, greaseable design and sintered metal bearing material for consistent steering response in demanding driving conditions.
Fits 2004-2015 Nissan TITAN, front left outer; Fits 2005-2015 Nissan Armada, front left outer; Fits 2017-2024 Nissan Armada, front left outer; Fits 2004-2013 INFINITI QX56, front left outer; Fits 2014-2024 INFINITI QX80, front left outer; Fits 2004 Nissan Pathfinder Armada, front left outer.
Key Features
- Part number TXMS30605 for direct identification and ordering
- Front left outer steering tie rod end
- Pre-greased and greaseable for serviceable maintenance
- Sintered metal bearing material for durable steering support
- Neoprene dust boot with green boot color for seal protection
- Castle nut, cotter pin, grease fitting, dust boot, and mounting hardware included
- Threaded stud design with M14-1.5 end 1 thread size
- Non-adjustable construction
Product Details
Mevotech TTX parts are built for high-use passenger vehicles, SUVs, fleets, and working trucks, and this TXMS30605 tie rod end follows that approach with a focus on durability and serviceability. The design uses a threaded stud, male-to-female end configuration, and a sintered metal bearing to support steering linkage performance under repeated load. The neoprene boot helps protect the joint from contamination, while the greaseable setup allows routine lubrication service.
This part cross-references MOOG Chassis Products ES800031 and Delphi TA3056 for the same application. For buyers searching for a Nissan Armada front left outer tie rod end or an INFINITI QX80 steering tie rod end, TXMS30605 provides a direct-fit option for the listed vehicles.
Common Problems This Part Can Address
- Loose or imprecise steering feel at the front left outer linkage
- Clunking or play caused by wear in the tie rod end joint
- Boot damage that exposes the joint to dirt and moisture
- Grease loss that can accelerate steering component wear
- Need for a replacement tie rod end on Nissan TITAN, Armada, QX56, QX80, or Pathfinder Armada applications
Installation Notes
Verify vehicle year, make, model, and front left outer position before installation. Inspect the steering linkage, alignment angles, and adjacent components for wear before replacing the part. Because this tie rod end is non-adjustable, final alignment should be checked after installation to confirm proper steering geometry.
Quality Assurance
Mevotech TTX steering components are engineered for demanding service conditions and built with labor-saving design elements to simplify installation. TXMS30605 is supplied with the listed service hardware and protective boot components for a complete replacement at the specified position.
