The Story
OE Front Right Rotor for Panamera
This VNE disc brake rotor is a front right replacement for select Porsche Panamera applications. Built to OE supplier standards and made in Germany, it is specified for vehicles using OE numbers 971615302F or 971615302L.
Key Features
- Part number 2479 disc brake rotor for front right fitment
- Vented rotor design for front brake service
- 360.0 mm outside diameter
- 36.0 mm nominal thickness
- 5 mounting bolt holes
- Rust resistant coating for added surface protection
- Made in Germany by an OE supplier
Detailed Description
VNE 2479 is a vented disc brake rotor engineered for the front right position on Porsche Panamera models. With a 360.0 mm outside diameter and 36.0 mm nominal thickness, it matches the dimensional requirements called out for the listed OE references. The rust resistant coating helps protect the rotor surface during storage and early service use, while the 5-bolt mounting pattern supports proper hub alignment on the specified applications. This part cross-references 971615302L for the same application.
Compatible With Porsche Panamera front right applications from 2017-2019, including 2019 Panamera front right with OE No. 971615302F, 2017-2019 Panamera front right with OE No. 971615302L, and 2017 Panamera front right with silver painted caliper and OE No. 971615302F. If you are searching for a Porsche Panamera front right brake rotor 2479 or a VNE 2479 replacement rotor, this part is built for those exact fitment references.
What It Helps Address
- Brake rotor wear that requires replacement at the front right wheel
- Rotor surface corrosion on the braking face or hat area
- Brake pulsation related to an out-of-spec rotor
- Noise or vibration caused by a worn vented rotor
- OE-number-specific replacement needs for Porsche Panamera brake service
Installation Notes and Tips
Verify the OE number on the original rotor before installation, especially on 2017-2019 Porsche Panamera front right applications. Confirm rotor thickness, outside diameter, and bolt-hole count against the vehicle’s brake specification before mounting. Clean the hub face thoroughly and inspect pads, caliper condition, and hardware wear before completing brake service.
Quality Assurance
VNE identifies this rotor as made in Germany and supplied to OE-level standards, supporting consistent fit and dimensional accuracy for the listed Porsche Panamera applications. Part number 2479 is built for direct replacement use where the specified OE references apply.
Description
OE Front Right Rotor for Panamera
This VNE disc brake rotor is a front right replacement for select Porsche Panamera applications. Built to OE supplier standards and made in Germany, it is specified for vehicles using OE numbers 971615302F or 971615302L.
Key Features
- Part number 2479 disc brake rotor for front right fitment
- Vented rotor design for front brake service
- 360.0 mm outside diameter
- 36.0 mm nominal thickness
- 5 mounting bolt holes
- Rust resistant coating for added surface protection
- Made in Germany by an OE supplier
Detailed Description
VNE 2479 is a vented disc brake rotor engineered for the front right position on Porsche Panamera models. With a 360.0 mm outside diameter and 36.0 mm nominal thickness, it matches the dimensional requirements called out for the listed OE references. The rust resistant coating helps protect the rotor surface during storage and early service use, while the 5-bolt mounting pattern supports proper hub alignment on the specified applications. This part cross-references 971615302L for the same application.
Compatible With Porsche Panamera front right applications from 2017-2019, including 2019 Panamera front right with OE No. 971615302F, 2017-2019 Panamera front right with OE No. 971615302L, and 2017 Panamera front right with silver painted caliper and OE No. 971615302F. If you are searching for a Porsche Panamera front right brake rotor 2479 or a VNE 2479 replacement rotor, this part is built for those exact fitment references.
What It Helps Address
- Brake rotor wear that requires replacement at the front right wheel
- Rotor surface corrosion on the braking face or hat area
- Brake pulsation related to an out-of-spec rotor
- Noise or vibration caused by a worn vented rotor
- OE-number-specific replacement needs for Porsche Panamera brake service
Installation Notes and Tips
Verify the OE number on the original rotor before installation, especially on 2017-2019 Porsche Panamera front right applications. Confirm rotor thickness, outside diameter, and bolt-hole count against the vehicle’s brake specification before mounting. Clean the hub face thoroughly and inspect pads, caliper condition, and hardware wear before completing brake service.
Quality Assurance
VNE identifies this rotor as made in Germany and supplied to OE-level standards, supporting consistent fit and dimensional accuracy for the listed Porsche Panamera applications. Part number 2479 is built for direct replacement use where the specified OE references apply.
