The Story
Delphi FE0679 In-Tank Electric Fuel Pump
The Delphi FE0679 is an in-tank electric fuel pump for gasoline applications, built as a standard replacement for select Mazda vehicles. It delivers 12-volt operation, a 58 psi system pressure rating, and an average flow rating of 30, making it a direct-fit fuel delivery component for the listed applications.
Compatible with 2006-2013 Mazda 3, Mazda CX-7, and Mazda 6 applications, this pump is suited for drivers replacing a worn or failing in-tank fuel pump on the exact vehicle platforms shown below. The FE0679 part number is also referenced in interchange listings for related OE and aftermarket applications.
Key Features
- 12-volt electric fuel pump for gasoline fuel systems
- In-tank mounting position with pin-style, 2-terminal male connection
- Outlet outside diameter: 0.375 in.
- Hose bead outlet type and strainer inlet type
- Maximum pressure rating: 123.0
- System pressure: 58 psi
- Average current draw: 10
- Average flow rating: 30
- Standard replacement grade
- Package contents: electric fuel pump, retainer, seal, steel clip, instruction sheet
Product Details
Delphi draws on OE experience and supplier knowledge developed over decades of original-equipment service. That background is reflected in the FE0679 fuel pump design, which is built for the fuel delivery demands of the listed Mazda applications and packaged with the components noted above for the service job. This part number, FE0679, is used for in-tank replacement on 2006-2013 Mazda 3, 2007-2012 Mazda CX-7, and 2006-2007 Mazda 6 models.
This part cross-references CFE0679 and P76818 for the same application.
What It Helps Address
- Hard starting caused by weak fuel delivery
- Engine stalling from insufficient fuel pressure
- Loss of power under load due to pump wear
- Fuel starvation from a failing in-tank pump assembly
- Pressure drop in gasoline fuel systems
Installation Notes and Tips
- Fits 2007-2013 Mazda 3, In-Tank
- Fits 2007-2012 Mazda CX-7, In-Tank
- Fits 2006-2007 Mazda 6, In-Tank
- Clean the fuel tank before installing the fuel pump to prevent future seal problems.
- Verify the 12-volt electrical connection, terminal type, and outlet style before installation.
- Confirm the in-tank position and fuel system specifications match the vehicle service requirements.
Quality Assurance
Delphi’s aftermarket fuel pump line is backed by OE heritage and application knowledge built from supplying original equipment to major automakers. The FE0679 is a standard replacement fuel pump engineered for the listed Mazda fitments and packaged for service installation.
Description
Delphi FE0679 In-Tank Electric Fuel Pump
The Delphi FE0679 is an in-tank electric fuel pump for gasoline applications, built as a standard replacement for select Mazda vehicles. It delivers 12-volt operation, a 58 psi system pressure rating, and an average flow rating of 30, making it a direct-fit fuel delivery component for the listed applications.
Compatible with 2006-2013 Mazda 3, Mazda CX-7, and Mazda 6 applications, this pump is suited for drivers replacing a worn or failing in-tank fuel pump on the exact vehicle platforms shown below. The FE0679 part number is also referenced in interchange listings for related OE and aftermarket applications.
Key Features
- 12-volt electric fuel pump for gasoline fuel systems
- In-tank mounting position with pin-style, 2-terminal male connection
- Outlet outside diameter: 0.375 in.
- Hose bead outlet type and strainer inlet type
- Maximum pressure rating: 123.0
- System pressure: 58 psi
- Average current draw: 10
- Average flow rating: 30
- Standard replacement grade
- Package contents: electric fuel pump, retainer, seal, steel clip, instruction sheet
Product Details
Delphi draws on OE experience and supplier knowledge developed over decades of original-equipment service. That background is reflected in the FE0679 fuel pump design, which is built for the fuel delivery demands of the listed Mazda applications and packaged with the components noted above for the service job. This part number, FE0679, is used for in-tank replacement on 2006-2013 Mazda 3, 2007-2012 Mazda CX-7, and 2006-2007 Mazda 6 models.
This part cross-references CFE0679 and P76818 for the same application.
What It Helps Address
- Hard starting caused by weak fuel delivery
- Engine stalling from insufficient fuel pressure
- Loss of power under load due to pump wear
- Fuel starvation from a failing in-tank pump assembly
- Pressure drop in gasoline fuel systems
Installation Notes and Tips
- Fits 2007-2013 Mazda 3, In-Tank
- Fits 2007-2012 Mazda CX-7, In-Tank
- Fits 2006-2007 Mazda 6, In-Tank
- Clean the fuel tank before installing the fuel pump to prevent future seal problems.
- Verify the 12-volt electrical connection, terminal type, and outlet style before installation.
- Confirm the in-tank position and fuel system specifications match the vehicle service requirements.
Quality Assurance
Delphi’s aftermarket fuel pump line is backed by OE heritage and application knowledge built from supplying original equipment to major automakers. The FE0679 is a standard replacement fuel pump engineered for the listed Mazda fitments and packaged for service installation.
