The Story
Delphi FE0688 In-Tank Electric Fuel Pump
The Delphi FE0688 is an in-tank electric fuel pump for gasoline applications, built for 12-volt systems and standard replacement service. It delivers up to 138.0 maximum pressure with a 73 psi system pressure rating, making it a direct-fit fuel delivery component for select Hyundai Azera and Kia Cadenza applications.
Backed by Delphi’s OE heritage and decades of supplier experience, this fuel pump is engineered with the same application knowledge used in aftermarket replacement parts. The FE0688 is a practical choice when you need consistent fuel delivery for a Hyundai Azera fuel pump replacement or a Kia Cadenza in-tank fuel pump service.
Key Features
- Part number: FE0688
- In-tank electric fuel pump for gasoline vehicles
- 12-volt operation with 2-pin male terminals
- Average current draw: 10 amps
- Average flow rating: 30
- Maximum pressure: 138.0
- System pressure: 73 psi
- Outlet outside diameter: 0.375
- Outlet type: hose bead
- Inlet type: strainer
- Standard replacement grade
- Package contents: electric fuel pump and instruction sheet
Detailed Description
Delphi FE0688 is an in-tank electric fuel pump designed for fuel delivery systems that require a gasoline-compatible, 12V replacement unit. It uses pin-style, male terminals with a two-terminal layout and is configured for in-tank mounting. The pump does not include a gasket or seal, wiring harness, or strainer, so verify all related service parts before installation.
Compatible With 2014-2017 Hyundai Azera, In-Tank, and 2014-2016 Kia Cadenza, In-Tank. This part cross-references Monroe Shocks & Struts (e.g., CFE0688) for the same application. If you are servicing a Hyundai Azera or Kia Cadenza fuel system, FE0688 provides the correct in-tank replacement format for the listed vehicles.
What This Fuel Pump Helps Address
- Hard starting caused by weak fuel delivery
- Engine hesitation under load from low fuel pressure
- Stalling related to inconsistent pump output
- Fuel starvation symptoms during acceleration
- Poor drivability from a failing in-tank pump
Installation Notes and Tips
Install FE0688 only in the confirmed in-tank locations listed above. Delphi notes that the fuel tank should be cleaned before installing the fuel pump to help prevent future seal problems. Because the gasket or seal is not included, inspect the tank opening, electrical connector, and fuel lines before reassembly. Confirm terminal type, outlet size, and system pressure requirements before installation on a Hyundai Azera or Kia Cadenza.
Quality Assurance
Delphi draws on more than 100 years of OE experience and a broad aftermarket portfolio built from supplier knowledge used by major automakers. FE0688 reflects that OE-based engineering approach for standard replacement fuel system service.
Description
Delphi FE0688 In-Tank Electric Fuel Pump
The Delphi FE0688 is an in-tank electric fuel pump for gasoline applications, built for 12-volt systems and standard replacement service. It delivers up to 138.0 maximum pressure with a 73 psi system pressure rating, making it a direct-fit fuel delivery component for select Hyundai Azera and Kia Cadenza applications.
Backed by Delphi’s OE heritage and decades of supplier experience, this fuel pump is engineered with the same application knowledge used in aftermarket replacement parts. The FE0688 is a practical choice when you need consistent fuel delivery for a Hyundai Azera fuel pump replacement or a Kia Cadenza in-tank fuel pump service.
Key Features
- Part number: FE0688
- In-tank electric fuel pump for gasoline vehicles
- 12-volt operation with 2-pin male terminals
- Average current draw: 10 amps
- Average flow rating: 30
- Maximum pressure: 138.0
- System pressure: 73 psi
- Outlet outside diameter: 0.375
- Outlet type: hose bead
- Inlet type: strainer
- Standard replacement grade
- Package contents: electric fuel pump and instruction sheet
Detailed Description
Delphi FE0688 is an in-tank electric fuel pump designed for fuel delivery systems that require a gasoline-compatible, 12V replacement unit. It uses pin-style, male terminals with a two-terminal layout and is configured for in-tank mounting. The pump does not include a gasket or seal, wiring harness, or strainer, so verify all related service parts before installation.
Compatible With 2014-2017 Hyundai Azera, In-Tank, and 2014-2016 Kia Cadenza, In-Tank. This part cross-references Monroe Shocks & Struts (e.g., CFE0688) for the same application. If you are servicing a Hyundai Azera or Kia Cadenza fuel system, FE0688 provides the correct in-tank replacement format for the listed vehicles.
What This Fuel Pump Helps Address
- Hard starting caused by weak fuel delivery
- Engine hesitation under load from low fuel pressure
- Stalling related to inconsistent pump output
- Fuel starvation symptoms during acceleration
- Poor drivability from a failing in-tank pump
Installation Notes and Tips
Install FE0688 only in the confirmed in-tank locations listed above. Delphi notes that the fuel tank should be cleaned before installing the fuel pump to help prevent future seal problems. Because the gasket or seal is not included, inspect the tank opening, electrical connector, and fuel lines before reassembly. Confirm terminal type, outlet size, and system pressure requirements before installation on a Hyundai Azera or Kia Cadenza.
Quality Assurance
Delphi draws on more than 100 years of OE experience and a broad aftermarket portfolio built from supplier knowledge used by major automakers. FE0688 reflects that OE-based engineering approach for standard replacement fuel system service.
