The Story
CV Joint Boot for Front Inner Applications
The Mevotech DX631 is a conical neoprene CV joint boot for front inner driveline service. It includes grease and two adjustable clamps to support a secure, service-ready replacement on select Acura and Honda applications.
Key Features
- Neoprene construction for flexible CV joint protection
- Conical boot design for front inner axle applications
- Includes grease and 2 clamps
- Adjustable clamps for a more precise fit
- Large-end clamp minimum diameter: 3.01 in.
- Mevotech DX631 part number for direct identification
Detailed Description
Mevotech DX631 is a front inner CV joint boot built for driveline hardware replacement where the original boot has split, cracked, or lost its seal. The neoprene material provides the flexibility needed around the joint while the conical shape supports a proper fit on the axle assembly. This part is listed for 2013-2015 Acura ILX, 2011-2015 Honda CR-Z, 2007-2013 Honda Fit, 1998-2000 Honda Civic, and 1997 Honda Civic del Sol in front inner positions. This part cross-references Beck/Arnley 103-2922 for the same application.
What It Helps Address
- Grease leakage from a damaged CV boot
- Contamination entering the CV joint
- Boot cracking from age, heat, or road exposure
- Noise or vibration caused by a compromised joint seal
- Need for a front inner boot replacement on Acura ILX and Honda Fit, Civic, CR-Z, or Civic del Sol
Installation Notes and Tips
Confirm the axle position before installation: Fits 2013-2015 Acura ILX, front inner; Fits 2011-2015 Honda CR-Z, front inner; Fits 2007-2013 Honda Fit, front inner; Fits 1998-2000 Honda Civic, front inner; Fits 1997 Honda Civic del Sol, front inner. Clean the joint thoroughly before boot installation, pack the joint with the included grease, and secure both clamps evenly to maintain the seal. Verify the large-end clamp diameter against the axle before final tightening. Mevotech DX631 is also referenced by StrongArm 6496 and other listed interchange numbers for the same application.
Quality Assurance
Mevotech supplies driveline hardware for service replacement applications, and DX631 is built to match the listed fitment and component requirements for the specified front inner positions.
Description
CV Joint Boot for Front Inner Applications
The Mevotech DX631 is a conical neoprene CV joint boot for front inner driveline service. It includes grease and two adjustable clamps to support a secure, service-ready replacement on select Acura and Honda applications.
Key Features
- Neoprene construction for flexible CV joint protection
- Conical boot design for front inner axle applications
- Includes grease and 2 clamps
- Adjustable clamps for a more precise fit
- Large-end clamp minimum diameter: 3.01 in.
- Mevotech DX631 part number for direct identification
Detailed Description
Mevotech DX631 is a front inner CV joint boot built for driveline hardware replacement where the original boot has split, cracked, or lost its seal. The neoprene material provides the flexibility needed around the joint while the conical shape supports a proper fit on the axle assembly. This part is listed for 2013-2015 Acura ILX, 2011-2015 Honda CR-Z, 2007-2013 Honda Fit, 1998-2000 Honda Civic, and 1997 Honda Civic del Sol in front inner positions. This part cross-references Beck/Arnley 103-2922 for the same application.
What It Helps Address
- Grease leakage from a damaged CV boot
- Contamination entering the CV joint
- Boot cracking from age, heat, or road exposure
- Noise or vibration caused by a compromised joint seal
- Need for a front inner boot replacement on Acura ILX and Honda Fit, Civic, CR-Z, or Civic del Sol
Installation Notes and Tips
Confirm the axle position before installation: Fits 2013-2015 Acura ILX, front inner; Fits 2011-2015 Honda CR-Z, front inner; Fits 2007-2013 Honda Fit, front inner; Fits 1998-2000 Honda Civic, front inner; Fits 1997 Honda Civic del Sol, front inner. Clean the joint thoroughly before boot installation, pack the joint with the included grease, and secure both clamps evenly to maintain the seal. Verify the large-end clamp diameter against the axle before final tightening. Mevotech DX631 is also referenced by StrongArm 6496 and other listed interchange numbers for the same application.
Quality Assurance
Mevotech supplies driveline hardware for service replacement applications, and DX631 is built to match the listed fitment and component requirements for the specified front inner positions.
