Original: $57.34
-65%$57.34
$20.07The Story
Sparta PN2011 Electric Fuel Pump
Sparta PN2011 is a specific-fit in-tank electric fuel pump for gasoline applications. It is built as a standard replacement for higher-mileage and earlier model vehicles, with OE-informed fit and performance guidance from Delphi distribution.
Key Features
- In-tank electric fuel pump for gas applications
- Specific fit for direct application matching
- Turbine pump design with 12-volt operation
- Average flow rating of 26.0 and maximum pressure of 125.0
- Minimum pressure rating of 44
- Threaded terminals with 2 male terminals
- Mounting hardware, gasket/seal, and installation instructions included
- Package contents: electric fuel pump, (2) hose clamps, hose piece, isolator, pall nut, (2) seals, instruction sheets
Detailed Description
Sparta PN2011 is an internal, in-tank electric fuel pump designed for gasoline fuel systems that require a specific replacement part. The turbine-style pump uses a 12.0-volt electrical setup, draws an average of 6.0 amps, and is rated for 26.0 average flow with up to 125.0 maximum pressure. It uses a hose-bead outlet, strainer inlet type, nitrile rubber seal material, and threaded male terminals for a straightforward electrical connection. This part number, PN2011, is listed across a wide range of import and domestic applications, including Acura NSX, Honda Accord, Toyota Camry, Mazda RX-7, and Lexus LS400 coverage.
This part cross-references Bosch (e.g., 69496, 69734) for the same application.
What It Is Used For
- Replacing a worn in-tank fuel pump that causes hard starting
- Restoring fuel delivery on vehicles with low fuel pressure
- Addressing engine hesitation under load from weak pump output
- Correcting intermittent fuel starvation in older gasoline systems
- Replacing a noisy or failing pump in high-mileage vehicles
Installation Notes and Tips
Install PN2011 in the tank using the included seals and mounting hardware. Verify the vehicle uses a 12-volt gasoline in-tank pump with threaded terminals and a specific-fit configuration before installation. Confirm hose routing, electrical terminal orientation, and fuel system cleanliness during service. This pump is listed for many applications, including Fits 1986-1993 Honda Accord, In-Tank; Fits 1993-1995 Mazda RX-7, In-Tank; and Fits 1990-2000 Lexus LS400, In-Tank.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicles where fit and fuel delivery accuracy matter. PN2011 is a standard replacement fuel pump built around OE-informed application coverage and component specifications.
Description
Sparta PN2011 Electric Fuel Pump
Sparta PN2011 is a specific-fit in-tank electric fuel pump for gasoline applications. It is built as a standard replacement for higher-mileage and earlier model vehicles, with OE-informed fit and performance guidance from Delphi distribution.
Key Features
- In-tank electric fuel pump for gas applications
- Specific fit for direct application matching
- Turbine pump design with 12-volt operation
- Average flow rating of 26.0 and maximum pressure of 125.0
- Minimum pressure rating of 44
- Threaded terminals with 2 male terminals
- Mounting hardware, gasket/seal, and installation instructions included
- Package contents: electric fuel pump, (2) hose clamps, hose piece, isolator, pall nut, (2) seals, instruction sheets
Detailed Description
Sparta PN2011 is an internal, in-tank electric fuel pump designed for gasoline fuel systems that require a specific replacement part. The turbine-style pump uses a 12.0-volt electrical setup, draws an average of 6.0 amps, and is rated for 26.0 average flow with up to 125.0 maximum pressure. It uses a hose-bead outlet, strainer inlet type, nitrile rubber seal material, and threaded male terminals for a straightforward electrical connection. This part number, PN2011, is listed across a wide range of import and domestic applications, including Acura NSX, Honda Accord, Toyota Camry, Mazda RX-7, and Lexus LS400 coverage.
This part cross-references Bosch (e.g., 69496, 69734) for the same application.
What It Is Used For
- Replacing a worn in-tank fuel pump that causes hard starting
- Restoring fuel delivery on vehicles with low fuel pressure
- Addressing engine hesitation under load from weak pump output
- Correcting intermittent fuel starvation in older gasoline systems
- Replacing a noisy or failing pump in high-mileage vehicles
Installation Notes and Tips
Install PN2011 in the tank using the included seals and mounting hardware. Verify the vehicle uses a 12-volt gasoline in-tank pump with threaded terminals and a specific-fit configuration before installation. Confirm hose routing, electrical terminal orientation, and fuel system cleanliness during service. This pump is listed for many applications, including Fits 1986-1993 Honda Accord, In-Tank; Fits 1993-1995 Mazda RX-7, In-Tank; and Fits 1990-2000 Lexus LS400, In-Tank.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicles where fit and fuel delivery accuracy matter. PN2011 is a standard replacement fuel pump built around OE-informed application coverage and component specifications.
