Original: $139.72
-65%$139.72
$48.90The Story
Fuel Pump Module Assembly for Dodge Trucks
Sparta PN3194 is a specific-fit in-tank fuel pump module assembly for select 1991-1993 Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 models. It is built as a standard replacement for gasoline applications and includes the fuel sending unit, strainer, gasket, and seal for a complete service-focused repair.
Key Features
- Specific-fit fuel pump module assembly for confirmed Dodge truck and Ramcharger applications
- Electric in-tank turbine pump design for gasoline fuel systems
- 12-volt operation with 40-43 psi pressure range
- Average flow rating of 42 and average current draw of 8
- Fuel sending unit included for accurate fuel level reporting
- Strainer included; quick-connect outlet with 3 outlets and 0.375 in. outlet outside diameter
- Plastic housing with nitrile rubber gasket or seal included
- Female oval connector with 1 connector, 5 terminals, and pin-type terminals
Detailed Description
Sparta PN3194 is a fuel pump module assembly engineered for higher-mileage and earlier-model vehicles, backed by Delphi distribution and OE fuel system expertise. This in-tank electric module is a standard replacement for gasoline-powered Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 trucks from 1991-1993. The assembly includes the pump module with float arm, seal, and instruction sheet, and it is configured with a turbine pump design, external strainer, and quick-connect outlet for service replacement work. If you are replacing a worn fuel pump module on a Dodge D150 or Ramcharger, PN3194 provides the core components needed for a direct-fit repair. This part cross-references Airtex Fuel Pumps E7047M and Carter P74655M for the same application.
What It Helps Repair
- Hard starting caused by a weak or failing in-tank fuel pump
- Fuel starvation under load or at highway speed
- Inaccurate fuel gauge readings from a worn sending unit
- Low fuel pressure in gasoline systems requiring 40-43 psi
- Intermittent pump operation related to aging module components
Installation Notes and Tips
Install PN3194 in the fuel tank only, and verify the connector shape, terminal count, and outlet style before removal of the original module. Replace the tank seal during service, and confirm the float arm moves freely after installation. Because mounting hardware and lock ring are not included, reuse or source the required retaining components as needed. Always compare the original module to the new assembly and confirm vehicle-specific fitment for your exact Dodge D150, D250, D350, Ramcharger, W150, W250, or W350 application.
Quality Assurance
Sparta fuel system parts are distributed through Delphi, an OE full-line fuel supplier, and are positioned for earlier-model and higher-mileage vehicles where fit and performance matter. PN3194 is a standard replacement fuel pump module assembly built for confirmed vehicle applications and packaged with the components listed above.
Description
Fuel Pump Module Assembly for Dodge Trucks
Sparta PN3194 is a specific-fit in-tank fuel pump module assembly for select 1991-1993 Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 models. It is built as a standard replacement for gasoline applications and includes the fuel sending unit, strainer, gasket, and seal for a complete service-focused repair.
Key Features
- Specific-fit fuel pump module assembly for confirmed Dodge truck and Ramcharger applications
- Electric in-tank turbine pump design for gasoline fuel systems
- 12-volt operation with 40-43 psi pressure range
- Average flow rating of 42 and average current draw of 8
- Fuel sending unit included for accurate fuel level reporting
- Strainer included; quick-connect outlet with 3 outlets and 0.375 in. outlet outside diameter
- Plastic housing with nitrile rubber gasket or seal included
- Female oval connector with 1 connector, 5 terminals, and pin-type terminals
Detailed Description
Sparta PN3194 is a fuel pump module assembly engineered for higher-mileage and earlier-model vehicles, backed by Delphi distribution and OE fuel system expertise. This in-tank electric module is a standard replacement for gasoline-powered Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 trucks from 1991-1993. The assembly includes the pump module with float arm, seal, and instruction sheet, and it is configured with a turbine pump design, external strainer, and quick-connect outlet for service replacement work. If you are replacing a worn fuel pump module on a Dodge D150 or Ramcharger, PN3194 provides the core components needed for a direct-fit repair. This part cross-references Airtex Fuel Pumps E7047M and Carter P74655M for the same application.
What It Helps Repair
- Hard starting caused by a weak or failing in-tank fuel pump
- Fuel starvation under load or at highway speed
- Inaccurate fuel gauge readings from a worn sending unit
- Low fuel pressure in gasoline systems requiring 40-43 psi
- Intermittent pump operation related to aging module components
Installation Notes and Tips
Install PN3194 in the fuel tank only, and verify the connector shape, terminal count, and outlet style before removal of the original module. Replace the tank seal during service, and confirm the float arm moves freely after installation. Because mounting hardware and lock ring are not included, reuse or source the required retaining components as needed. Always compare the original module to the new assembly and confirm vehicle-specific fitment for your exact Dodge D150, D250, D350, Ramcharger, W150, W250, or W350 application.
Quality Assurance
Sparta fuel system parts are distributed through Delphi, an OE full-line fuel supplier, and are positioned for earlier-model and higher-mileage vehicles where fit and performance matter. PN3194 is a standard replacement fuel pump module assembly built for confirmed vehicle applications and packaged with the components listed above.
