The Story
Mechanical Fuel Pump for Jeep Applications
The Sparta PN8009 mechanical fuel pump is a standard replacement for older Jeep fuel systems that use a gasoline mechanical pump. Built with an aluminum housing and a threaded outlet, it is designed for higher-mileage and earlier model vehicles where reliable fuel delivery matters.
Compatible with Jeep Wrangler, CJ5, CJ7, Cherokee, Scrambler, Wagoneer, J10, and J20 applications across the listed model years, this pump is a direct-fit service part for common restoration and repair work. The PN8009 is backed by OE-focused fuel system expertise from Delphi distribution.
Key Features
- Mechanical fuel pump for gasoline applications
- Standard replacement grade for older Jeep fuel systems
- Aluminum housing for durable service
- 1 inlet and 1 threaded outlet
- Outlet fitting thread size: 1/2" - 20
- Average flow rating: 20.0
- Operating pressure range: 5 to 7.0
- Gasket, seal, mounting hardware, and instruction sheet included
- Two mounting holes for straightforward installation
Detailed Description
Sparta PN8009 is a mechanical fuel pump engineered for Jeep vehicles that rely on a cam-driven fuel delivery system. It uses a hose-bead inlet with a 0.313 outside diameter and a threaded outlet connection, making it suitable for service replacement on classic Jeep Wrangler, CJ5, CJ7, Cherokee, Scrambler, Wagoneer, J10, and J20 models. This part cross-references Airtex 6737 and Carter M6737 for the same application.
As a gasoline pump with a 5 to 7.0 pressure range and 20.0 average flow rating, PN8009 supports consistent fuel delivery for carbureted engines found in many earlier Jeep platforms. The included gasket and seal help complete the repair, while the aluminum housing supports long-term underhood use.
Common Repair Uses
- Hard starting caused by weak fuel delivery
- Fuel starvation during acceleration or load changes
- Low fuel pressure in carbureted Jeep engines
- Fuel leaks at an aging mechanical pump body or seal
- Restoration replacement for original Jeep fuel system components
Installation Notes and Tips
Verify inlet and outlet orientation before installation, and confirm the 1/2" - 20 threaded outlet connection matches the existing fuel line setup. Inspect the mounting surface, replace worn fuel lines as needed, and use the included gasket during assembly. Prime the fuel system and check for leaks after startup.
Quality Assurance
Sparta fuel system parts are distributed through Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance for higher-mileage and earlier model vehicles. PN8009 is built as a standard replacement mechanical fuel pump for the listed Jeep applications.
- Fits 1987-1990 Jeep Wrangler
- Fits 1976-1986 Jeep CJ7
- Fits 1974-1985 Jeep Cherokee
- Fits 1981-1985 Jeep Scrambler
- Fits 1972-1983 Jeep CJ5
- Fits 1980-1983 Jeep Wagoneer
- Fits 1971-1973 Jeep Wagoneer
- Fits 1974-1980 Jeep J10
- Fits 1976 Jeep J20
- Fits 1974 Jeep J20
Description
Mechanical Fuel Pump for Jeep Applications
The Sparta PN8009 mechanical fuel pump is a standard replacement for older Jeep fuel systems that use a gasoline mechanical pump. Built with an aluminum housing and a threaded outlet, it is designed for higher-mileage and earlier model vehicles where reliable fuel delivery matters.
Compatible with Jeep Wrangler, CJ5, CJ7, Cherokee, Scrambler, Wagoneer, J10, and J20 applications across the listed model years, this pump is a direct-fit service part for common restoration and repair work. The PN8009 is backed by OE-focused fuel system expertise from Delphi distribution.
Key Features
- Mechanical fuel pump for gasoline applications
- Standard replacement grade for older Jeep fuel systems
- Aluminum housing for durable service
- 1 inlet and 1 threaded outlet
- Outlet fitting thread size: 1/2" - 20
- Average flow rating: 20.0
- Operating pressure range: 5 to 7.0
- Gasket, seal, mounting hardware, and instruction sheet included
- Two mounting holes for straightforward installation
Detailed Description
Sparta PN8009 is a mechanical fuel pump engineered for Jeep vehicles that rely on a cam-driven fuel delivery system. It uses a hose-bead inlet with a 0.313 outside diameter and a threaded outlet connection, making it suitable for service replacement on classic Jeep Wrangler, CJ5, CJ7, Cherokee, Scrambler, Wagoneer, J10, and J20 models. This part cross-references Airtex 6737 and Carter M6737 for the same application.
As a gasoline pump with a 5 to 7.0 pressure range and 20.0 average flow rating, PN8009 supports consistent fuel delivery for carbureted engines found in many earlier Jeep platforms. The included gasket and seal help complete the repair, while the aluminum housing supports long-term underhood use.
Common Repair Uses
- Hard starting caused by weak fuel delivery
- Fuel starvation during acceleration or load changes
- Low fuel pressure in carbureted Jeep engines
- Fuel leaks at an aging mechanical pump body or seal
- Restoration replacement for original Jeep fuel system components
Installation Notes and Tips
Verify inlet and outlet orientation before installation, and confirm the 1/2" - 20 threaded outlet connection matches the existing fuel line setup. Inspect the mounting surface, replace worn fuel lines as needed, and use the included gasket during assembly. Prime the fuel system and check for leaks after startup.
Quality Assurance
Sparta fuel system parts are distributed through Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance for higher-mileage and earlier model vehicles. PN8009 is built as a standard replacement mechanical fuel pump for the listed Jeep applications.
- Fits 1987-1990 Jeep Wrangler
- Fits 1976-1986 Jeep CJ7
- Fits 1974-1985 Jeep Cherokee
- Fits 1981-1985 Jeep Scrambler
- Fits 1972-1983 Jeep CJ5
- Fits 1980-1983 Jeep Wagoneer
- Fits 1971-1973 Jeep Wagoneer
- Fits 1974-1980 Jeep J10
- Fits 1976 Jeep J20
- Fits 1974 Jeep J20
